R2900G Load Haul Dump Additional Messages Caterpillar


Additional Messages
`

There are several specific messages on this machine. The exact location of the messages and the description of the messages are reviewed in this section. Please become familiarized with all messages.

Make sure that all of the messages are legible. Clean the messages or replace the messages if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the messages, use a cloth, water and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. Loose adhesive will allow the messages to fall.

Replace any message that is damaged, or missing. If a message is attached to a part that is replaced, install a message on the replacement part. Any AVSpare dealer can provide new messages.



Illustration 1g01390967

Do Not Weld or Drill on Lift Arms (1). This message is located on the left side and the right side of the lift arms.



Illustration 2g01224851

Transmission Oil Fast Fill (2). This message is located in the articulation area on the right side of the machine.



Illustration 3g01429856

This additional message identifies the location of the fast fill connector for the transmission oil.

Hydraulic Oil Fast Fill (3). This message is located in the articulation area on the right side of the machine.



Illustration 4g01429855

This additional message identifies the location of the fast fill connector for the hydraulic oil.

Alternate Exit (4). This message is located on the rear window and the inner window.



Illustration 5g01002993

Alternate Exit (5). This message is located on the rear window and the inner window.



Illustration 6g00915912

Do Not Weld or Drill on ROPS (6). This message is located on the outside the operator station, above the side window.



Illustration 7g00899564

Engine Coolant Fast Fill (7). This message is located on the radiator guard on the right side of the machine.



Illustration 8g01429853

This additional message identifies the location of the fast fill connector for the engine coolant.

Information System:

R2900G Load Haul Dump Safety Messages
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Reversing Fan - Test
AP655D and BG655D Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust - Left Pump (Steel Track)
587R Pipelayer Machine Systems Fuel Tank - Remove and Install
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0679 - FMI 05
C15 and C18 Generator Set Engines Expansion Tank - Remove and Install
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0679 - FMI 03
C15 and C18 Generator Set Engines Fuel Cooler - Remove and Install
AP655D and BG655D Asphalt Pavers Propel System Pump Synchronization - Test and Adjust - Steel Track
AP655D and BG655D Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust - Right Pump (Steel Track)
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track (Rubber) - Remove and Install
AP655D and BG655D Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Left Propel Pump (Steel Track)
R2900G Load Haul Dump Engine Starting with Auxiliary Start Receptacle
R1700G Load Haul Dump Lifting and Tying Down the Machine
C4.4 and C6.6 Engines for Caterpillar Built Machines Indicator Lamps
AP655D and BG655D Asphalt Pavers Propel System Speed Sensor (Propel Motor) - Adjust - Steel Track Machine
3412E Engine for Caterpillar Built Machines Event Code List
AP655D and BG655D Asphalt Pavers Propel System Pressure Limiter Valve - Test and Adjust - Right Propel Pump (Steel Track)
2007/06/25 Recoil Seal Guard Prevents Leaks {4151}
770 and 772 Off-Highway Truck/Tractors Seat - Remove and Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track Tensioner - Remove and Install
587R Pipelayer Machine Systems Platform - Remove
587R Pipelayer Machine Systems Platform - Install
770 and 772 Off-Highway Truck/Tractors Heater Coil - Remove and Install