Only use AVSpare approved work tools on this machine.
Note: Do not use a AVSpare work tool on a machine that is not approved by AVSpare.
AVSpare approves the following work tools for use on this machine:
AVSpare Approved Work Tools for Multi Terrain Loaders | |||
---|---|---|---|
Work Tool | 247B2 | 257B2 | 257B2
HF |
General Purpose Bucket |
A | A | A |
General Purpose Bucket
|
O | O | O |
General Purpose Bucket
|
O | O | O |
General Purpose Bucket
|
A | A | A |
Multipurpose Bucket
|
A | A | A |
Multipurpose Bucket
|
O | O | O |
Multipurpose Bucket
|
O | O | O |
Multipurpose Bucket
|
A | A | A |
Light Material Bucket
|
O | O | O |
Light Material Bucket
|
A | A | A |
Light Material Bucket
|
A | O | O |
Utility Bucket
|
A | A | A |
Utility Bucket
|
O | O | O |
Utility Bucket
|
O | O | O |
Dirt Bucket
|
NR | NR | NR |
Dirt Bucket
|
A | A | A |
Dirt Bucket
|
O | O | O |
Dirt Bucket
|
O | O | O |
A14B Auger | O | O | O |
A19B Auger | A | A | O |
A26B Auger | ! | ! | A |
BH27
Backhoe |
O | O | O |
BH30
Backhoe |
O | O | O |
BH30 w
Backhoe |
! | ! | ! |
BH150
Backhoe |
O | O | O |
BH160 w
Backhoe |
! | ! | ! |
Angle Blade
|
A | A | A |
Angle Blade
|
O | O | O |
Dozer Blade
|
O | O | O |
Dozer Blade
|
A | A | A |
BA18 Angle Broom | O | O | O |
BU115 Utility Broom | O* | O | O |
BU118 Utility Broom | A | O* | O* |
BP15B Pickup Broom | O* | O | O |
BP18B Pickup Broom | ! | O* | O* |
PC203 Cold Planer | A | A | A |
PC204 Cold Planer | A | A | A |
PC205 Cold Planer | ! | ! | O |
PC206 Cold Planer | ! | ! | A |
Industrial Grapple Bucket
|
A | A | A |
Industrial Grapple Bucket
|
O | O | O |
Industrial Grapple Bucket
|
O | O | O |
Industrial Grapple Bucket
|
A | A | A |
Industrial Grapple Fork
|
O | O | O |
Industrial Grapple Fork
|
O | O | O |
Utility Fork
|
O | O | O |
Utility Fork
|
O | O | O |
Utility Grapple Fork
|
O | O | O |
Utility Grapple Fork
|
O | O | O |
Utility Grapple Bucket
|
O | O | O |
Utility Grapple Bucket
|
O | O | O |
Grapple Rake
|
O | O | O |
Grapple Rake
|
O | O | O |
LR15B Landscape Rake | O
* |
O
* |
O
* |
LR18B Landscape Rake | O
* |
O
* |
O
* |
PR172 Power Rake | O | O | O |
PR184 Power Rake | O | O | O |
PR190 Power Rake | A | A | A |
LT13B Landscape Tiller | O | O | O |
LT18B Landscape Tiller | O | O | O |
Material Handling Arm | O | O | O |
SR17 Snowblower | O | O | O |
SR18 Snowblower | NR | NR | NR |
SR21 Snowblower | NR | NR | NR |
SR318 Snowblower | NR | NR | A |
SR321 Snowblower | NR | NR | A |
SG16B Stump Grinder | O | O | O |
SG18B Stump Grinder | ! | ! | O |
T9B Trencher | A | O | O |
T15B Trencher | ! | ! | A |
CV16B Vibratory Compactor | O* | O* | O* |
CV18B Vibratory Compactor | ! | ! | ! |
SW45
Wheel Saw 3 inch |
! | ! | A* |
SW45
Wheel Saw 6 inch |
! | ! | A* |
SW45
Wheel Saw 8 inch |
! | ! | A* |
H50 H50S Hammer | O | O | ! |
H63 H63S Hammer | O | O | ! |
BR160 Brush Cutter | O | O | O |
BR166 Brush Cutter | O | O | O |
BR172 Brush Cutter | O | O | O |
BR272 Brush Cutter | O | O | O |
BR378 Brush Cutter | ! | ! | ! |
O - The machine performance is optimum with this work tool.
A - The machine performance is acceptable with this work tool.
HF - The machine is equipped with high flow hydraulics.
NR - This work tool is not recommended for use on this machine.
! - This work tool is not approved for use on this machine. Do not use this work tool on this machine.
* - This work tool has a lift restriction on this machine. Do not raise the lower pivot pin higher than
Many of the work tools in the table have an Operation and Maintenance Manual. Please refer to the Operation and Maintenance Manual that is provided with the work tool for the proper use of the work tool.
Contact your AVSpare dealer concerning specific work tools that are approved by AVSpare for this machine. This list was complete at the time of publication. There may be additional work tools that have been approved since that time. Consult your AVSpare dealer for an updated list of approved work tools.
INTENDED USE STATEMENT for the Material Handling Arm
This Work Tool has the intended functions of lifting and transporting suspended loads. Always select sufficiently sized lifting accessories. Always inspect the lifting accessories before use.
Do not use the work tool improperly.
Remove the work tool from the machine before you lift the host machine. Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for details.
INTENDED USE STATEMENT for the Multipurpose Bucket
This Work Tool has the intended functions of dozing, digging, loading, lifting, carrying, and moving material such as earth, crushed rock, or gravel.
Do not use the work tool improperly.
Remove the work tool from the machine before you lift the host machine. Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for details.
INTENDED USE STATEMENT for the Grapple Bucket
This Work Tool has the intended functions of digging, loading, lifting, carrying, and moving material such as earth, crushed rock, gravel, or debris.
Do not use the work tool improperly.
Remove the work tool from the machine before you lift the host machine. Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for details.
INTENDED USE STATEMENT for the Grapple Rake
This Work Tool has the intended functions of raking, loading, carrying, and moving bulky material. The material may be encountered in the following applications:
- Landscape cleanup
- Storm debris cleanup
- Demolition
- Industrial
- Construction
Do not use the work tool improperly.
- Do not pry with one rake tine. Use multiple rake tines in order to loosen material.
- Remove the work tool from the machine before you lift the host machine. Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for details.
- Do not place the weight of the host machine on the grapples in the open position.
INTENDED USE STATEMENT for the Grapple Forks
This Work Tool has the intended functions of loading, carrying, and moving bulky materials.
Do not use the work tool improperly.
Remove the work tool from the machine before you lift the host machine. Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for details.