16G MOTOR GRADER Every 50 Service Hours Or Weekly Caterpillar


Every 50 Service Hours Or Weekly
`
1.1. (5)Circle Guide Shoes
2.1. (6)Ripper/Scarifier
3.2. Earlier
4.1. (7)Axle Oscillation Bearings
5.1. (8)Wheel Lean Bearings
6.1. (9)Lean Bar Bearings
7.1. (10)Cylinder Lean Bar Bearing
8.1. (11)King Pin Bearings
9.1. (12)Cylinder Pivot Bearing

(5)Circle Guide Shoes

Lubricate six fittings, one on each shoe.

(6)Ripper/Scarifier

Lubricate three fittings, two at the cylinder trunnion and one at the rod end of cylinder.

Earlier

Lubricate eleven fittings, one on the rod end of cylinder.

Lubricate five fittings on each side.

(7)Axle Oscillation Bearings

Lubricate two fittings.

(8)Wheel Lean Bearings

Lubricate four fittings, two on each side.

(9)Lean Bar Bearings

Lubricate two fittings, one on each side.

(10)Cylinder Lean Bar Bearing

Lubricate one fitting.

(11)King Pin Bearings

Lubricate four fittings, two on each side.

(12)Cylinder Pivot Bearing

Lubricate one fitting.