Be Sure Everyone Survives Your Operation!
`
PR-105 PAVEMENT PROFILER
[KEBU0600]
MACHINE ARRANGEMENT
- 1. Have a first-aid kit handy. Use proper antiseptics on scratches, cuts, etc. immediately to avoid infection. LEARN WHERE TO GET PROPER MEDICAL SERVICE IF IT IS NEEDED.
- 2. Have a fire extinguisher handy, preferably mounted on the operator's platform.
- 3. Check to see that all personnel are clear of the machine before moving the machine. Sound the horn for several seconds to warn unobserved personnel and allow them time to clear the machine.
- 4. Never operate the machine under load until it is thoroughly warmed up - especially important with hydraulically operated equipment. Erratic machine response may occur when the hydraulic oil is cold.
- 5. Lower the main cutter or auxiliary cutter SLOWLY when starting a cut, or the machine may ride up on the cutter and travel backwards some distance.
- 6. DO NOT LET ANYONE STAND BEHIND THE MACHINE WHILE IT IS IN OPERATION. If the main cutter or auxiliary cutter hits a solid obstruction, the machine may jump backwards.
- 7. Work slowly and carefully until you are accustomed to the machine, so that you will not get yourself into a situation you are not yet prepared to handle.
- 8. Do not let anyone ride anywhere on the machine, not even for short distances. They could fall under the cutter or wheels.
- 9. Keep all personnel clear of the cutters and wheels when the engine is running.
- 10. If you must leave the machine unattended, lower the main cutter and auxiliary cutter until they are on the ground and shut the engine down. Be sure the travel control is at neutral and the emergency brake is on.
- 11. Never show off, grandstand or engage in horseplay on the job.
- 12. Never use alcoholic beverages or illicit drugs on the job. Also, be careful of medicine, tranquilizers and other drugs that can cause sleepiness. The increased reaction time caused by any of these could cost your life.
- 13. Devote your full attention to the job. Even a slight distraction can be dangerous while operating a machine.
- 14. Let only authorized and responsible persons operate the machine. No inexperienced person should ever be allowed to operate the machine without proper training first.
- 15. Never try to service a moving machine. You could fall under the machine.
- 16. Never try to mount a moving machine. You could fall under the machine.
- 17. Never operate an unsafe machine. You or your friends and associates could be seriously injured.
Information System:
CP-433B VIBRATORY COMPACTOR LEVELING BLADE
Testing And Adjusting
CP-433B VIBRATORY COMPACTOR LEVELING BLADE
Systems Operation
CP-433B & CS-433B VIBRATORY COMPACTORS SECONDARY/PARKING BRA
Testing And Adjusting
CP-433B & CS-433B VIBRATORY COMPACTORS SECONDARY/PARKING BRA
Systems Operation
CS-431B VIBRATORY COMPACTOR SECONDARY/PARKING BRAKE
Testing and Adjusting
CS-431B VIBRATORY COMPACTOR SECONDARY/PARKING BRAKE
Systems Operation
CS-431B VIBRATORY COMPACTOR PROPEL SYSTEM
Testing And Adjusting
CS-431B VIBRATORY COMPACTOR PROPEL SYSTEM
Systems Operation
CS-431B VIBRATORY COMPACTOR VITRATORY SYSTEM
Testing and Adjusting
CS-431B VIBRATORY COMPACTOR VITRATORY SYSTEM
Systems Operation
CP-433B & CS-433B VIBRATORY COMPACTORS VIBRATORY SYSTEM
Testing and Adjusting
CP-433B & CS-433B VIBRATORY COMPACTORS VIBRATORY SYSTEM
Systems Operation
PR-105 PAVEMENT PROFILER
If The Machine Is Serviced Well, It Will Provided Safe And Efficient Operation!
PR-105 PAVEMENT PROFILER
Major Machine Components
PR-105 PAVEMENT PROFILER
Major Machine Systems
PR-105 PAVEMENT PROFILER
Travel
PR-105 PAVEMENT PROFILER
Engine Starting Procedure
PR-105 PAVEMENT PROFILER
Non-Operational Travel
PR-105 PAVEMENT PROFILER
Starting Operation
PR-105 PAVEMENT PROFILER
During Operation
PR-105 PAVEMENT PROFILER
Preparing The Machine For Freezing Temperatures
PR-105 PAVEMENT PROFILER
Service Data
PR-105 PAVEMENT PROFILER
Service As Required
PR-105 PAVEMENT PROFILER
10 Hour Service