PR-1000 PAVEMENT PROFILER Service Data Caterpillar

Service Data

PR-1000 PAVEMENT PROFILER [KEBU0603]

PR-1000 PAVEMENT PROFILER Transporting The Machine

PR-1000 PAVEMENT PROFILER Controls And Systems For Servicing The Machine

MACHINE ARRANGEMENT

PR-1000 PAVEMENT PROFILER Be Sure Everyone Survives Your Operation!

PR-1000 PAVEMENT PROFILER If The Machine Is Serviced Well, It Will Provide Safe And Efficient Operation!

PR-1000 PAVEMENT PROFILER General Description

PR-1000 PAVEMENT PROFILER Major Machine Components

PR-1000 PAVEMENT PROFILER Track Drive Hydraulic System

1.1. Capacities (Approximate)

2.1. Fuels

3.1. Lubricants And Oils

4.1. Caterpillar 3412 Engine (Engine A)

5.1. Caterpillar 3208 Engine (Engine B)

6.1. Engine Cooling System Antifreeze

Capacities (Approximate)

Engine Crankcase (Refill Capacity)

AVSpare 3412 Engine ... 16 U.S. Gallons

AVSpare 3208 Engine ... 20 U.S. Quarts

Engine Cooling System (Engine Only)

AVSpare 3412 Engine ... 15 U.S. Gallons

AVSpare 3208 Engine ... 26 U.S. Quarts

Fuel Tank ... 400 U.S. Gallons

Water Tanks ... 1000 U.S. Gallons

Cutter Drum (50% Solution of Water and Ethylene Glycol Antifreeze) ... 100 U.S. Gallons

Main Hydraulic Oil Tank ... 44 U.S. Gallons

Hydraulic Oil Replenishing Tank ... 12 U.S. Gallons

Air Line Lubricator ... 1/2 U.S. Pint

Fuels

No. 2 fuel oil or No. 2D diesel fuel with a minimum cetane rating of 40. In extremely cold temperatures use No. 1 fuel oil or No. 1D diesel fuel. A higher cetane rating is required for high altitude operation or cold weather starting.

Lubricants And Oils

BR - Multipurpose Grease (CMI No. A05536)

1. Type: Multipurpose grease as defined by SAE J310a.

2. Consistency: NLGI No. 1.

3. Vendor: Mobilux EP-1, Mobil Grease MP, or equivalent.

LB - Leg Barrel Grease (CMI No. A03305)

1. Type: Molybdenum disulfide or graphite adhesive black grease.

2. Consistency: NLGI No. 2.

3. Vendor: 1956 Texclad 2, or equivalent.

GL - Gear Lubricant (CMI No. A05535)

1. Type: Axle and manual transmission lubricant meeting API designations GL-5 or GL-6 as defined in SAE J308a.

2. Viscosity: SAE 90 as defined in SAE J306a.

3. Vendor: Mobilgear 630, or equivalent.

HO - Hydraulic System Oil (CMI No. A05533) Automatic Transmission Fluid, Type F, meets Ford Motor Company Specifications ESW-M2C33-F.

CO - Diesel Engine Crankcase Oil (CMI No. A05265)

1. Type: Engine oil meeting SAE designation CD or MIL-L-2104C.

2. Viscosity:

AVSpare 3412 Engine (Engine A)

AVSpare 3208 Engine (Engine B)

At temperatures below -10°F (-23° C) it may be necessary to warm the oil so the engine can be cranked and allow the oil to circulate freely. For operation in cold temperatures, see your AVSpare dealer for cold weather operation instructions.