If The Machine Is Serviced Well, It Will Provide Safe And Efficient Operation!
`
AP-800 ASPHALT PAVER
[KEBU0632]
AP-800 ASPHALT PAVER
Be Sure Everyone Survives Your Operation!
AP-800 ASPHALT PAVER
Be Sure The Tiger Paws Are In Shape For Running!
MACHINE ARRANGEMENT
AP-800 ASPHALT PAVER
Be Sure Everyone Survives Your Operation!
AP-800 ASPHALT PAVER
If The Machine Is Serviced Well, It Will Provide Safe And Efficient Operation!
AP-800 ASPHALT PAVER
Be Sure The Tiger Paws Are In Shape For Running!
AP-800 ASPHALT PAVER
Powerpack
- 1. Keep the machine clean. The process of cleaning will reveal loose bolts, hydraulic lines and fittings, and other trouble spots. Be especially careful to clean any oil, grease, dirt or mud from the handrails, stepping points and operator's platform to prevent falls. Clean any grease or oil from the controls so that a sure grip is available when any control is needed.
- 2. Always keep the operator's platform free from grease, oil, loose rags and loose tools. These can also cause falls.
- 3. Shut the engine down and place all control levers and switches, except the parking brake, in neutral or off before cleaning, adjusting or servicing the machine, unless the work to be done requires otherwise. If the engine must be running, ALWAYS HAVE TWO PERSONS WORKING; ONE PERSON AT THE CONTROLS. Then if something goes wrong the person at the controls can shut the engine down immediately.
- 4. Refuel the machine only with the engine stopped. Never smoke or have an open flame in the area when refueling. Always ground the spout against the filler neck to avoid a static electricity spark.
- 5. Refill the engine radiator only with the engine stopped. Turn the radiator cap slightly to the first stop to relieve the pressure before removing the cap. If the engine is hot, steam can spray outward under great pressure.
- 6. Install the screed lift holding link before working beneath the screed.
- 7. Never search for a hydraulic oil leak with your hands. Oil escaping from a small hole can be almost invisible and can penetrate the skin. Always wear gloves and use a piece of cardboard to find leaks. If you are struck by high pressure hydraulic oil, see a doctor immediately. Serious reactions are possible if not treated immediately.
- 8. Never use hand sockets instead of impact sockets on impact wrenches. Chrome sockets will eventually shatter under the tremendous energy transfer of today's high performance impact wrenches. The hard chrome surface of these sockets will also wear the square drive faces of the tool spindle.
Information System:
AP-800 ASPHALT PAVER
Be Sure Everyone Survives Your Operation!
WE-851B WINDROW ELEVATOR
Service When Required
WE-851B WINDROW ELEVATOR
2400 Hour Service
WE-851B WINDROW ELEVATOR
1000 Hour Or Annual Service
WE-851B WINDROW ELEVATOR
400 Hour Service
WE-851B WINDROW ELEVATOR
200 Hour Service
WE-851B WINDROW ELEVATOR
Daily Or 10 Hour Service
WE-851B WINDROW ELEVATOR
Paving Operation
WE-851B WINDROW ELEVATOR
Engine Operation
WE-851B WINDROW ELEVATOR
Installing The Paver Hitch
WE-851B WINDROW ELEVATOR
Be Sure The Tiger Paws Are In Shape For Running!
WE-851B WINDROW ELEVATOR
If The Machine Is Serviced Well, It Will Provide Safe And Efficient Operation!
AP-800 ASPHALT PAVER
Be Sure The Tiger Paws Are In Shape For Running!
AP-800 ASPHALT PAVER
Powerpack
AP-800 ASPHALT PAVER
Hydraulic Systems
AP-800 ASPHALT PAVER
Automatic Screed Control Systems
AP-800 ASPHALT PAVER
Both Control Panels
AP-800 ASPHALT PAVER
Screed
AP-800 ASPHALT PAVER
Starting Procedure
AP-800 ASPHALT PAVER
Shutdown Procedure
AP-800 ASPHALT PAVER
Roading Operation
AP-800 ASPHALT PAVER
Preparing The Machine For Paving Operation
AP-800 ASPHALT PAVER
Paving Operation
AP-800 ASPHALT PAVER
Ending The Paving Operation