R2900 Load Haul Dump Fire Extinguisher Location Caterpillar


Fire Extinguisher Location
`

Make sure that a fire extinguisher is on the machine. Make sure that you are familiar with the operation of the fire extinguisher. Inspect the fire extinguisher and service the fire extinguisher on a regular basis. Obey the recommendations on the instruction plate.

If equipped, know how to use the machine fire suppression system.




Illustration 1g00912952

The recommended place to mount a fire extinguisher on a machine fitted with an enclosed operator's station is on the left side of the radiator guard.

Do not weld the ROPS/FOPS to install the fire extinguisher. Also, do not drill holes in the ROPS/FOPS to mount the fire extinguisher.




Illustration 2g00944292

The recommended place to mount a fire extinguisher on a machine fitted with an open operator's station is on the left side of the radiator guard.




Illustration 3g00912953

If more than one fire extinguisher is required, the recommended place to mount a second fire extinguisher is on the right side of the rear frame behind the fender.

Information System:

120H and 135H Motor Graders Machine Systems Fan and Gear Motor (Hydraulic Fan) - Install
3524B Engine for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Introduction
789C Off-Highway Truck Steering System Steering Accumulator - Test and Charge
D350E Series II and D400E Series II Articulated Trucks Power Train Solenoid Valve (Lockup Clutch)
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems Cab - Install
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems Hydraulic Tank - Assemble
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems Hydraulic Tank - Disassemble
226 and 242 Skid Steer Loaders Power Train Axle - Install
226 and 242 Skid Steer Loaders Power Train Axle - Assemble
226 and 242 Skid Steer Loaders Power Train Axle - Disassemble
226 and 242 Skid Steer Loaders Power Train Axle - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Transmission
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Differential and Final Drive
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Torque Converter
3524B Engine for Caterpillar Built Machines Coupling Oil Filter Base - Remove
3524B Engine for Caterpillar Built Machines Coupling Oil Filter Base - Disassemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System General Information - Integrated Toolcarrier
3524B Engine for Caterpillar Built Machines Coupling Oil Filter Base - Assemble
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Location of Components
R2900 Load Haul Dump Model Views and Specifications
R1600 Load Haul Dump Machine Electrical System Engine Shutdown
R1600 Load Haul Dump Machine Electrical System Actual Gear Indicator
R1600 Load Haul Dump Machine Electrical System Transmission Oil Temperature