Capacities (Refill)
`
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
[SEBU7459]
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Specifications
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Rated Load
MACHINE ARRANGEMENT
Show/hide table
| Approximate Refill Capacities | ||
|---|---|---|
| Component or System | Liters | US gal |
| Engine Crankcase (1) | 30 | 7.9 |
| Transmission | 34 | 9.0 |
| Two-Valve Hydraulic System for 950G/962G Series II(2) | 153 | 40.4 |
| Three-Valve Hydraulic System(2) | 154 | 40.7 |
| Hydraulic Tank | 88 | 23.2 |
| Cooling System | 55 | 14.5 |
| Fuel Tank | 260 | 68.7 |
| Front Differential(3) | 36 | 9.5 |
| Rear Differential(3) | 36 | 9.5 |
| Groeneveld Automatic TWIN Greasing System Reservoir | 4 | 1 |
Show/hide table
| (1) | This includes changing the oil filter. |
| (2) | This includes the hydraulic tank, the hydraulic lines, and all hydraulic components. |
| (3) | Allow |
Reference: For refill capacities on the air conditioner system, refer to Service Manual, SENR5664, "Specifications", "System Capacities for Refrigerant".
Information System:
D350E Series II and D400E Series II Articulated Trucks Power Train
Priority Valve
3524B Engine for Caterpillar Built Machines
Engine Oil Pump - Remove
Installation Procedure for the New Traction Control System{5051}
R1600 Load Haul Dump Machine Electrical System
Transmission Oil Temperature
R1600 Load Haul Dump Machine Electrical System
Actual Gear Indicator
R1600 Load Haul Dump Machine Electrical System
Engine Shutdown
R2900 Load Haul Dump
Model Views and Specifications
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Location of Components
3524B Engine for Caterpillar Built Machines
Coupling Oil Filter Base - Assemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
General Information - Integrated Toolcarrier
3524B Engine for Caterpillar Built Machines
Coupling Oil Filter Base - Disassemble
3524B Engine for Caterpillar Built Machines
Coupling Oil Filter Base - Remove
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0606 - FMI 02
554 and 574 Forwarders Power Train
Filling and Flushing the Hydrostatic System - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Introduction
3524B Engine for Caterpillar Built Machines
Engine Oil Pump - Install
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0607 - FMI 02
R2900 Load Haul Dump
Plate Locations and Film Locations
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0608 - FMI 02
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0609 - FMI 03
226 and 242 Skid Steer Loaders Power Train
Chain (Drive) - Install
226 and 242 Skid Steer Loaders Power Train
Chain (Drive) Tension - Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Piston Pump (Hydraulic and Steering)
Field Installation Of 3Z-5855 Jake Brake Modification {1119, 1129, 7314}