The Product Identification Number (PIN) will be used to identify a powered machine that is designed for an operator to ride.
AVSpare products such as engines, transmissions and major attachments that are not designed for an operator to ride are identified by Serial Numbers.
The Certification Plate (CE) is used to verify that the product conforms to all of the requirements that were established by a country or by a group of countries. The product is tested by a certified testing group in order to verify the conformance.
For quick reference, record the identification numbers in the spaces that are provided below the illustration.
Product Identification Number (PIN)
 | |
| Illustration 1 | g00944346 |
Machine PIN ___________________________________
The PIN plate is located on the front frame in the articulation area.
Serial Number Plates (SN)
 | |
| Illustration 2 | g00944347 |
Engine Serial Number___________________________
 | |
| Illustration 3 | g00944350 |
Transmission Serial Number______________________
 | |
| Illustration 4 | g00944353 |
Torque Converter Serial Number__________________
Certification Plate (CE)
 | |
| Illustration 5 | g00944354 |
The CE plate is located below the PIN plate. The Year of Manufacture is located on the CE plate.
Emission Certification Film
 | |
| Illustration 6 | g00913328 |
Typical Example (English) | |
 | |
| Illustration 7 | g00913329 |
Typical Example (French) | |
The emissions certification film is located on the engine.