R2900 Load Haul Dump Battery Disconnect Switch Caterpillar


Battery Disconnect Switch
`



Illustration 1g00937796



Illustration 2g00937794

The battery disconnect switch (1) is located on the right rear side of the machine.


Disconnect Switch ON - To activate the electrical system, insert the battery disconnect switch key and turn the key clockwise. The battery disconnect switch must be in the ON position before you start the engine.


Disconnect Switch OFF - To deactivate the electrical system, turn the battery disconnect switch key counterclockwise to the OFF position.

The battery disconnect switch and the engine start switch perform different functions. The entire electrical system is disabled when you turn off the battery disconnect switch. The battery remains connected to the electrical system when you turn off the engine start switch key.

Turn the battery disconnect switch to the OFF position and remove the key when you service the electrical system or any other machine components.

Turn the battery disconnect switch to the OFF position and remove the disconnect switch key if you do not operate the machine for an extended period of a month or more. This will prevent the drainage of the battery.


NOTICE

Never move the battery disconnect switch to the OFF position while the engine is operating. Serious damage to the electrical system could result.


Information System:

PMG3516 Power Module Roading
D350E Series II and D400E Series II Articulated Trucks Power Train Transmission Hydraulic Control
TK711, TK721, TK722 and TK732 Track Feller Bunchers Additional Messages
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0609 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0609 - FMI 05
TK711, TK721, TK722 and TK732 Track Feller Bunchers Safety Messages
Field Installation Of 3Z-5855 Jake Brake Modification {1119, 1129, 7314}
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Piston Pump (Hydraulic and Steering)
226 and 242 Skid Steer Loaders Power Train Chain (Drive) Tension - Adjust
226 and 242 Skid Steer Loaders Power Train Chain (Drive) - Install
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0609 - FMI 03
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0608 - FMI 02
TK711, TK721, TK722 and TK732 Track Feller Bunchers Specifications
R1600 Load Haul Dump Machine Electrical System Torque Converter Lockup Control
R1600 Load Haul Dump Machine Electrical System Lift Arm Positioner
R1600 Load Haul Dump Machine Electrical System Hydraulic Oil Temperature
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0610 - FMI 03
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Hydraulic Control
797 Off-Highway Truck Engine Supplement Engine Oil Cooler - Remove
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0610 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0610 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0611 - FMI 03
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0611 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0611 - FMI 06