Engine Start Switch
`
R2900 Load Haul Dump
[SEBU7325]
R2900 Load Haul Dump
Battery Disconnect Switch
R2900 Load Haul Dump
Fire Suppression System (Foam) - If Equipped
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
Show/hide table
 | |
| Illustration 1 | g00944409 |
Engine Start Switch (1) - Engine start switch (1) is used to turn the electrical system on and engine start switch (1) is used to start the engine.
Show/hide table
| OFF Position (2) - Turn engine start switch (1) to OFF position (2) in order to stop the engine. |
Note: The front lights, the rear lights, and the dome lamp can be turned on when the engine start switch is in the OFF position.
Show/hide table
| ON Position (3) - Turn the engine start switch (1) to the ON position (3) in order to activate the electrical circuits in the operator's station. |
Show/hide table
| START Position (4) - To start the engine, turn engine start switch (1) clockwise to START position (4). When engine start switch (1) is released, engine start switch (1) will return to ON position (3) . |
Note: If the engine fails to start, return engine start switch (1) to the OFF position (2). This must be done before you attempt to start the engine again.
Information System:
3524B Engine for Caterpillar Built Machines
Engine Oil Cooler - Disassemble
D250E Series II and D300E Series II Articulated Trucks Power Train
Selector and Pressure Control Valve
2002/08/19
Correction to Operation and Maintenance Manual , "Caterpillar Monitoring System" {7451, 7490}
2002/08/19
Correction to Operation and Maintenance Manual , "Caterpillar Monitoring System" {7451, 7490}
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement
Engine, Torque Converter, Transmission and Output Transfer Gears - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Transmission Case
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Monitoring System
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Clutch (First and Third)
3524B Engine for Caterpillar Built Machines
Engine Oil Cooler - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Clutch (Reverse and Second)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Clutch (Forward High and Forward Low)
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0612 - FMI 06
R2900 Load Haul Dump
Fire Suppression System (Foam) - If Equipped
143H and 163H Motor Graders All Wheel Drive
Location of Electrical Components
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0613 - FMI 03
3524B Engine for Caterpillar Built Machines
Engine Oil Cooler - Assemble
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0613 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0613 - FMI 06
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Alternator - Remove and Install
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 00
Installation Procedure for New 190-3692 Pressure Sensor {1408, 3016}
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Electric Starting Motor - Remove and Install
D350E Series II and D400E Series II Articulated Trucks Power Train
Transmission Mounting
120H and 135H Motor Graders
Equipment Lowering with Engine Stopped