R2900 Load Haul Dump Indicators Caterpillar


Indicators
`



Illustration 1g00914852


Autodig Indicator (1) (If Equipped) - Indicates an Autodig cycle has been initiated.



Illustration 2g00944442


Ride Control Indicator (2) (If Equipped) - Indicates the ride control system is activated.


Automatic Lubrication Indicator (3) (Electric Type) (If Equipped) - This indicator will be on when the automatic lubrication system is in operation.


Automatic Lubrication Indicator (3) (Hydraulic Type) (If Equipped) - This indicator will be on when there is a fault in the automatic lubrication system. Report the fault to service personnel when convenient.


Exhaust Back Pressure Indicator (4) (If Equipped) - Indicates high exhaust back pressure. If back pressure is over 6 kPa (25 inch of H2O), the light will illuminate and the exhaust purifilter must be cleaned.


Residual Brake Oil Pressure Indicator (5) (If Equipped) - Indicates that there is oil pressure in the wheel brakes. The light will illuminate when the service brakes are applied. The light should go out when the brakes are released.

Information System:

RM-350B Road Reclaimer/Mixer Power Train Piston Pump Control (Rear Propel Pump) - Test and Adjust
D250E Series II and D300E Series II Articulated Trucks Power Train Output Transfer Gear Group
R2900 Load Haul Dump Gauges
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Introduction
143H and 163H Motor Graders All Wheel Drive General Information
216 and 232 Skid Steer Loaders 3024 Engine Supplement Air Cleaner - Remove and Install
216 and 232 Skid Steer Loaders 3024 Engine Supplement Radiator and Hydraulic Oil Cooler - Install
216 and 232 Skid Steer Loaders 3024 Engine Supplement Radiator and Hydraulic Oil Cooler - Remove
216 and 232 Skid Steer Loaders 3024 Engine Supplement Gear Motor (Fan) - Install
216 and 232 Skid Steer Loaders 3024 Engine Supplement Gear Motor (Fan) - Remove
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Parking Brake
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Service Brakes
R2900 Load Haul Dump Light Switches
216 and 232 Skid Steer Loaders 3024 Engine Supplement Muffler - Remove and Install
216 and 232 Skid Steer Loaders 3024 Engine Supplement Engine - Remove
216 and 232 Skid Steer Loaders 3024 Engine Supplement Engine - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
2002/10/07 Changes to the Hood Assembly Improve Service Life {7155, 7251, 7267}
R2900 Load Haul Dump Remote Control Switch - If Equipped
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Cooler - Install
Troubleshooting Failures of the Exhaust Tube on 3408E and 3412E Engines{1061}
3054E Industrial Engine Fuel Injection Pump
2002/09/02 Parts for the Planetary for the A19 Auger Are Now Serviced {5904, 7000}
226 and 242 Skid Steer LoadersEngine Supplement Engine - Remove