R2900 Load Haul Dump Alternate Exit Caterpillar


Alternate Exit
`
R2900 Load Haul Dump [SEBU7325]
OPERATOR STATION
WINDOW GP
R2900 Load Haul Dump Alternate Exit
1.1. Rear Window
2.1. Front, Side and Rear Window

If the operator's station door cannot be opened, the front window, the side windows or the rear window in the operator's station can be used as an alternate exit.

Rear Window

------ WARNING! ------

Incorrect window sealing (beading) may obstruct window removal and may cause inability to use alternate exit. Personal injury can result.

Use the correct method of sealing (beading) to secure the operator's station windows. Contact your AVSpare dealer for the correct sealing (beading) method.

----------------------



Illustration 1g00944530

In order to open the rear window from inside the operator's station, loosen knob (2). Push button (1) and open the rear window. While holding the rear window fully open, tighten knob (2) in order to lock the rear window in the OPEN position.




Illustration 2g00944531

In order to open the rear window from outside the operator's station, remove locking pins (3) and pins (4) while holding the rear window.




Illustration 3g00944532

Move the top of the rear window in order to access locking pin (5) and knob (2). Remove locking pin (5). Remove knob (2). Move the rear window away from the rear window opening.

Front, Side and Rear Window




Illustration 4g00944533

In order to exit the operator's station through the front window, side window or rear window, exert outwards pressure on the window until the window separates from the operator's station frame.




Illustration 5g00944534

In order to remove the front window, side window or rear window from outside the operator's station, pull on the locking strip tab to remove the locking strip. Exert inwards pressure on the window until it separates from the operator's station frame.

------ WARNING! ------

Incorrect window sealing (beading) may obstruct window removal and may cause inability to use alternate exit. Personal injury can result.

Use the correct method of sealing (beading) to secure the operator's station windows. Contact your AVSpare dealer for the correct sealing (beading) method.

----------------------

To install the window and seal, contact your AVSpare dealer for the correct sealing method.

Information System:

Bench Test Procedure For A 735 Articulated Truck Transmission {3030, 3073, 3139}
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement Muffler - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Tilt Cylinder - Isolation and Drift Check - Integrated Toolcarrier
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement Muffler - Remove
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Engine to Torque Converter, Transmission, Output Transfer Gears - Connect
3054E Industrial Engine Crankshaft - Steel Crankshaft
574B Forwarder Power Train Power Train Drive Loop Speed - Test and Adjust
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Electronic Control (Body Up or Down Sensor)
793C Off-Highway Truck Machine Systems Ladder - Remove and Install
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Brake Oil Overheating Troubleshooting
140H and 160H Motor Graders Engine Supplement Engine Oil Filler - Remove and Install
PS-360B Paving Compactor Light Switches
2002/09/16 A Guard Extends the Service Life of the Lift Cylinder Lubrication Hose {7510}
R1600G Load Haul Dump Braking System Pressure Reducing Valve (Pilot Oil) - Test and Adjust
D350E Series II and D400E Series II Articulated Trucks Power Train Transmission Planetary
247 and 257 Multi Terrain Loaders Quick Coupler
3508B Engine for D11R Track-Type Tractors Event Codes
D350E Series II and D400E Series II Articulated Trucks Power Train Differential and Bevel Gear
120H and 135H Motor Graders Reference Material
R2900 Load Haul Dump Braking
R2900 Load Haul Dump Steering and Transmission Lock Control (STIC Steering)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Steering System Steering System Pressure (High Pressure Stall) - Test
120H and 135H Motor Graders Machine Systems Air Control Valve (Parking Brake) - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Steering System Piston Pump (Steering) Low Pressure Standby - Test