Steering and Transmission Lock Control (STIC Steering)
`
R2900 Load Haul Dump
[SEBU7325]
OPERATOR STATION
CONTROL GP-STEERING
R2900 Load Haul Dump
Steering and Transmission Lock Control (STIC Steering)
R2900 Load Haul Dump
Steering Control
R2900 Load Haul Dump
Implement and Steering Lockout (STIC Steering) - Test
R2900 Load Haul Dump
Transmission Control
Show/hide table
![]() |
No clearance for person in operator's station access area when machine turns. Severe injury or death from crushing could occur. Engage transmission/primary steering lock before leaving the operator's station. |
![]() |
Show/hide table
![]() | |
Illustration 1 | g00916083 |
Steering and Transmission Lock Lever - This lock lever is used to lock the transmission shift into neutral and is the primary lockout system used to disable the steering.
Show/hide table
![]() | Locked - Move the steering and transmission lock lever towards the STIC steering control to engage the lock. When the lock lever is moved to the locked position, the steering is disabled and the transmission will shift to neutral. |
Note: The machine's steering control functions will be disabled when the operator's station door is opened approximately 150 mm (6.0 inch). Ensure the operator's station door is firmly closed before operating the machine.
Show/hide table
![]() | |
Illustration 2 | g00944626 |
Show/hide table
![]() | Unlocked - Move the lock lever away from the STIC steering control to unlock the STIC steering control. When the lock lever is moved to the unlocked position, the transmission will not shift into a speed until the transmission direction control switch is first moved to the NEUTRAL position. |
Information System:
R2900 Load Haul Dump
Braking
120H and 135H Motor Graders
Reference Material
D350E Series II and D400E Series II Articulated Trucks Power Train
Differential and Bevel Gear
3508B Engine for D11R Track-Type Tractors
Event Codes
247 and 257 Multi Terrain Loaders
Quick Coupler
D350E Series II and D400E Series II Articulated Trucks Power Train
Transmission Planetary
R1600G Load Haul Dump Braking System
Pressure Reducing Valve (Pilot Oil) - Test and Adjust
2002/09/16
A Guard Extends the Service Life of the Lift Cylinder Lubrication Hose {7510}
R2900 Load Haul Dump
Alternate Exit
Bench Test Procedure For A 735 Articulated Truck Transmission {3030, 3073, 3139}
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement
Muffler - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Tilt Cylinder - Isolation and Drift Check - Integrated Toolcarrier
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Steering System
Steering System Pressure (High Pressure Stall) - Test
120H and 135H Motor Graders Machine Systems
Air Control Valve (Parking Brake) - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Steering System
Piston Pump (Steering) Low Pressure Standby - Test
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Steering System
Piston Pump (Steering) Margin Pressure - Test and Adjust
12H Motor Grader
Reference Material
561N Pipelayer
Specifications
120H and 135H Motor Graders
Safety Messages
561N Pipelayer
Plate Locations and Film Locations
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement
Radiator - Install
3054E Industrial Engine
Engine Oil Filter
CB-634D Paving Compactor Machine Electronic Control System
Water Spray Is Always Off
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Propel System
Drum Drive Group