R2900 Load Haul Dump Operating Technique Information Caterpillar


Operating Technique Information
`


Illustration 1g01740134

For good operator vision and loader stability, carry the loaded bucket low, approximately 400 mm (15 inch) above the ground.

Travel in reverse when you carry a load down a steep incline. Travel forward when you go uphill.



Illustration 2g01740153

Clean the work area during waiting periods and level the work area during waiting periods.



Illustration 3g01740154

Maintain traction by avoiding excessive downward pressure on the bucket.



Illustration 4g01740134

Make sure that the bucket that is being used is appropriate for the work that is being performed. Exceeding the machine limits will reduce the service life of the machine.

Information System:

3500 and 3500B High Displacement Engines for Caterpillar Built Machines Water Pump - Install
R2900 Load Haul Dump Engine and Machine Warm-Up
R2900 Load Haul Dump Engine Starting with Auxiliary Start Receptacle
140H and 160H Motor Graders Engine Supplement Refrigerant Compressor - Remove and Install
R2900 Load Haul Dump Engine Starting with Jump Start Cables
Hitch Bore and Steering Cylinder Bore Dimensions for Wheel Skidders and Feller Bunchers{4303, 7051}
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Brake Hydraulic System
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Assemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Torque Converter
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement Modular Front End - Install
D350E Series II and D400E Series II Articulated Trucks Power Train Final Drive and Wheel
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Disassemble
R2900 Load Haul Dump Loading, Hauling and Dumping
2002/11/18 A New Drum Propel Motor and Final Drive Is Now Used on Certain Vibratory Soil Compactors {4351, 6605}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Air Compressor - Remove and Install
120H and 135H Motor Graders Machine Systems Bank Valve - Disassemble - Bank Valve with Hydraulic Detent
D350E Series II and D400E Series II Articulated Trucks Power Train Rear Drive Shaft
12H Motor Grader Engine Supplement Refrigerant Condenser - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Lift Kickout - Adjust - Integrated Toolcarrier
140H and 160H Motor Graders Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Work Tool Positioner - Adjust - Integrated Toolcarrier
550, 570 and 580 Wheel Harvesters Safety Messages
550, 570 and 580 Wheel Harvesters Specifications
D350E Series II and D400E Series II Articulated Trucks Power Train Selector and Pressure Control Valve