Specifications
`
550, 570 and 580 Wheel Harvesters
[SEBU7196]
550, 570 and 580 Wheel Harvesters
Safety Messages
550, 570 and 580 Wheel Harvesters
Maintenance Interval Schedule
MACHINE ARRANGEMENT
550, 570 and 580 Wheel Harvesters
Plate Locations and Film Locations
550, 570 and 580 Wheel Harvesters
Starting Above 0°C (32°F)
550, 570 and 580 Wheel Harvesters
Changing Direction and Speed
550, 570 and 580 Wheel Harvesters
Roading the Machine
550, 570 and 580 Wheel Harvesters
Reference Material
550, 570 and 580 Wheel Harvesters
Capacities (Refill)
550, 570 and 580 Wheel Harvesters
Operating Technique Information
Show/hide table
 | |
| Illustration 1 | g00438403 |
The 580 Wheel Harvester is shown. (1) Stick. (2) Boom. (3) Hydraulic oil tank. (4) Engine. (5) Radiator. (6) Operator compartment. (7) Fuel tank. (8) Harvester head. (9) Pendulum arms. (10) Bogie. | |
Note: The 550 Wheel Harvester and the 570 Wheel Harvester are not equipped with bogie assembly (10).
Show/hide table
 | |
| Illustration 2 | g00706362 |
550 Wheel Harvester and 570 Wheel Harvester | |
Note: The dimensions will vary with various tire sizes and with different lengths of the pendulum arms.
Show/hide table
| 550 Wheel Harvester (1) | |
| Minimum Height (A) | 3170 mm (124 inch) |
| Maximum Height (A) | 4110 mm (161.8 inch) |
| Maximum Length (B) | 6600 mm (259.8 inch) |
| Minimum Clearance (C) | 180 mm (7 inch) |
| Maximum Clearance (C) | 940 mm (37 inch) |
| Width over tires | 2780 mm (109 inch) |
| Weight | 13000 kg (28660 lb) |
Show/hide table
| ( 1 ) | These dimensions are for a machine that is equipped with four 700/55 tires. |
Show/hide table
| 570 Wheel Harvester (1) | |
| Minimum Height (A) | 3170 mm (124 inch) |
| Maximum Height (A) | 4389 mm (172 inch) |
| Maximum Length (B) | 6790 mm (267 inch) |
| Minimum Clearance (C) | 0 mm (0 inch) |
| Maximum Clearance (C) | 1219 mm (48 inch) |
| Width over tires | 2780 mm (109 inch) |
| Weight | 15000 kg (33000 lb) |
Show/hide table
| ( 1 ) | These dimensions are for a machine that is equipped with four 700/55 tires. |
Show/hide table
 | |
| Illustration 3 | g00706361 |
580 Wheel Harvester | |
Note: The dimensions will vary with various tire sizes and with different lengths of the pendulum arms.
Show/hide table
| 580 Wheel Harvester (1) | |
| Minimum Height (A) | 3170 mm (124 inch) |
| Maximum Height (A) | 4330 mm (170 inch) |
| Maximum Length (B) | 7300 mm (287 inch) |
| Minimum Clearance (C) | 120 mm (4.7 inch) |
| Maximum Clearance (C) | 1160 mm (45 inch) |
| Width over front tires | 3000 mm (118.1 inch) |
| Width over rear tires | 2850 mm (112.2 inch) |
| Weight | 17500 kg (38500 lb) |
Show/hide table
| ( 1 ) | These dimensions are for a machine that is equipped with four 600/55 tires on the front and two 700/55 tires on the rear. |
Information System:
550, 570 and 580 Wheel Harvesters
Safety Messages
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Work Tool Positioner - Adjust - Integrated Toolcarrier
140H and 160H Motor Graders Engine Supplement
Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Lift Kickout - Adjust - Integrated Toolcarrier
12H Motor Grader Engine Supplement
Refrigerant Condenser - Remove and Install
D350E Series II and D400E Series II Articulated Trucks Power Train
Rear Drive Shaft
120H and 135H Motor Graders Machine Systems
Bank Valve - Disassemble - Bank Valve with Hydraulic Detent
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Air Compressor - Remove and Install
2002/11/18
A New Drum Propel Motor and Final Drive Is Now Used on Certain Vibratory Soil Compactors {4351, 6605}
R2900 Load Haul Dump
Loading, Hauling and Dumping
R2900 Load Haul Dump
Operating Technique Information
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Water Pump - Install
D350E Series II and D400E Series II Articulated Trucks Power Train
Selector and Pressure Control Valve
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Front Steering) - Remove and Install
550, 570 and 580 Wheel Harvesters
Maintenance Interval Schedule
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Transmission Oil Cooler - Remove and Install
3524B Engine for Caterpillar Built Machines
Bearing Clearance - Check
320B, 320B L and 320B N Excavators
Reference Material
R2900 Load Haul Dump
Bucket Loading Hauling Units
CB-534D and CB-564D Asphalt Compactors
Belts - Inspect/Adjust/Replace
R2900 Load Haul Dump
Stopping the Machine
938G II Wheel Loader and IT38G II Integrated Toolcarrier
Additional Messages
140H and 160H Motor Graders Engine Supplement
Water Separator and Fuel Filter (Primary) - Remove and Install
Troubleshooting Compressed Air System Components and Performance{1803, 5500}