PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 4E-6979 PILOT MANIFOLDS IN DEALER PARTS STOCK
[UEBE0082]
SERVICE EQUIPMENT AND SUPPLIES
PARTS STOCK, ORDERING & RETURN
UEBE0082-00
Show/hide table
| 03Dec2019 |
U-731
A-577
D-636
O-636
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 4E-6979 PILOT MANIFOLDS IN DEALER PARTS STOCK |
|
| 7750 | PI70783 |
|
Show/hide table
| NOTE: | AVSpare’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to AVSpare. |
| NOTE: | When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field, "7751" as the Group Number, "56" as the Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Mar2020 |
PROBLEM
Show/hide table
| The 4E-6979 Pilot Manifolds in dealer parts stock inventory may be missing a machining process at the o-ring port for the relief valve. These manifolds are normally for use on R2900 (EU5), R2900G, and R3000 Load Haul Dump Machines. |
ACTION REQUIRED
Show/hide table
| Inspect all 4E-6979 Pilot Manifolds in dealer parts stock inventory for a missing ?O? Ring Port for the relief valve in the manifold. Reference the attached Image1 and Image2. If the machining process has been missed remove the manifold from dealer stock. |
Show/hide table
 |
| Image1 |
 |
| Image2 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HANDLE ASSEMBLY IN THE CAB LEFT HAND SIDE DOOR GROUP ON CERTAIN 773E AND 777E OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR UPDATING OR INSTALLING PRODUCT LINK PL641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING A POWERTAIN HOSE ON CERTAIN 773G AND 775G OFF-HIGHWAY TRUCKS DUE TO ABRASION
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL243 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL243 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING OR INSTALLING PRODUCT LINK PL641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING INPUT TRANSFER GEAR CASE ON CERTAIN 793F, 793F CMD, AND 793F XQ OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSPECTING BEVEL GEAR BOLTED JOINTS ON CERTAIN 797, 797B, AND 797F OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL AND CORRECTING THE FLS SETTING ON CERTAIN C18 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE REAR PUMP DRIVE LINES GROUP ON CERTAIN 994K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB RISER CROSSMEMBER ON CERTAIN 548 LL, 558 LL, AND 568 LL FORESTRY EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BAFFLE GROUP ON CERTAIN 140GC MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STEERING LINES ON CERTAIN 794 AC, 796 AC, AND 798 AC OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 379-3544 CAB DOOR GROUP ON CERTAIN 777E OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REWORKING THE BRAKE OIL FILTER GROUP ON CERTAIN 795F AC OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING STEERING COLUMN SYSTEM RELATED COMPONENTS ON CERTAIN M314F/M315F/M316F/M317F/M318F/M320F/322F WHEELED EXCAVATORS AND MH3022/MH3024/M322F MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CERTAIN POWERTRAIN HOSES ON CERTAIN 777E OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTONS ON CERTAIN 793F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CAMSHAFT ON CERTAIN 793F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR ENABLING THE DESULFATION PROCEDURE ON CERTAIN CP44B AND CS44B VIBRATORY COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPLACING THE 8X-7948 AXLE SHAFT ON CERTAIN 777E OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BRAKE OIL COOLER MAY FAIL ON CERTAIN 777E OFF-HIGHWAY TRUCKS