Electrical Power Graphic Symbols
`
Fluid Power and Electrical Graphic Symbols
[SENR3981]
ELECTRICAL AND STARTING SYSTEM
Fluid Power and Electrical Graphic Symbols
Electrical Power Graphic Symbols
1.1. Basic Component Symbols
2.1. Switches
3.1. Resistors
4.1. Wire Coloring
5.1. Wire Identification
6.1. Components
7.1. Connectors
8.1. Splices
Note: Use this module as a basic reference guide for graphic symbols. Do not use this module as a comprehensive reference guide.
Show/hide table
![]() | |
Illustration 1 | g01390407 |
(A) Solenoid
(B) Motor (C) Battery (D) Exterior light (E) Circuit breaker (F) Fuse (G) Backlight (H) Potentiometer (J) Ground (K) Resistor (L) Alternator (M) Gauge (N) Normally open relay (P) Normally closed relay (R) Starter |
Show/hide table
![]() | |
Illustration 2 | g01390733 |
(S) Disconnect switch
(T) Normally open temperature switch (U) Normally closed temperature switch (V) Pressure switch (W) Normally open pressure switch (X) Normally closed pressure switch (Y) Toggle switch (Z) Flow switch (AA) Key switch |
Show/hide table
![]() | |
Illustration 3 | g01390734 |
(AB) Pressure resistor
(AC) Temperature resistor (AD) Float resistor |
Red ... RD
White ... WH
Orange ... OR
Yellow ... YL
Pink ... PK
Black ... BK
Gray ... GY
Purple ... PU
Brown ... BR
Green ... GN
Blue ... BU
Show/hide table
![]() | |
Illustration 4 | g01409811 |
Old format (AE) Wire label (AF) Color code (AG) Wire size |
Show/hide table
![]() | |
Illustration 5 | g01409813 |
New format (AE) Wire label (AF) Color code (AG) Wire size (AH) Wire number 5 in harness "H" |
Show/hide table
![]() | |
Illustration 6 | g01409816 |
Old format |
Show/hide table
![]() | |
Illustration 7 | g01409817 |
New format |
Show/hide table
![]() | |
Illustration 8 | g03212180 |
Old format (AJ) Connector label (AK) Receptacle side of connector (AL) Plug side of connector |
Show/hide table
![]() | |
Illustration 9 | g03212181 |
New format (AJ) Connector label (AK) Receptacle side of connector (AL) Plug side of connector |
Note: "H" is the harness identification, "C" stands for the connector, and "P/N" is the receptacle connector part number.
Show/hide table
![]() | |
Illustration 10 | g03212377 |
Old format (AM) Splice |
Show/hide table
![]() | |
Illustration 11 | g03212379 |
New format (AM) Splice (AN) Side 2 of the splice (AP) Side 1 of the splice |
Information System:
Inspection of Rim Assemblies of Off-Highway Trucks {4201, 4209}
CB14 Paving Compactor Machine Systems
Drum - Install
AS4251C Asphalt Paver
Operator Controls
AS4251C Asphalt Paver
Operator Controls - Main Control Panel
AS4251C Asphalt Paver
Operator Controls - Right Control Panel
AS4251C Asphalt Paver
Operator Controls - Left Control Panel
AP655D and BG655D Asphalt Pavers Propel System
Piston Pump Neutral - Test and Adjust - Right Propel Pump (Steel Track)
CB14 Paving Compactor Machine Systems
Drum - Remove
3176C, 3406E and 3456 Industrial Engines
Electronic Service Tools
16M Motor Grader Power Train
Transmission - Assemble
16M Motor Grader Power Train
Transmission - Disassemble
Bench Test Procedure for Hydraulic Piston Pumps{5070}
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Remove
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Disassemble
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Assemble
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Install
EquipmentManager Dealer Administrator Manual
Manage Equipment Groups
R2900G Load Haul Dump
Lifting and Tying Down the Machine
C4.4 (Mech) Industrial Engine
Engine Valve Lash - Inspect/Adjust
AP655D and BG655D Asphalt Pavers Propel System
Piston Pump Neutral - Test and Adjust - Left Propel Pump (Steel Track)
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Track (Rubber) - Remove and Install
AP655D and BG655D Asphalt Pavers Propel System
Relief Valve (Charge) - Test and Adjust - Right Pump (Steel Track)
AP655D and BG655D Asphalt Pavers Propel System
Pump Synchronization - Test and Adjust - Steel Track
C15 and C18 Generator Set Engines
Fuel Cooler - Remove and Install