700 Series Articulated Trucks, Configuration of Dash Information Not Supported by Electronic Technician Caterpillar


`
700 Series Articulated Trucks, Configuration of Dash Information Not Supported by Electronic Technician [TIBU4347]
OPERATOR STATION
PANEL GP
700 Series Articulated Trucks, Configuration of Dash Information Not Supported by Electronic Technician

CONFIDENTIAL TIBU4347-00

TECHNICAL INFORMATION BULLETIN

September 01, 2004

Articulated Trucks

725 (AFX1098-Up), 730 (AGF1011-Up), 735 (AWR625-Up), 740 (AXM1377-UP) and 740 EJECTOR (AZZ340-Up)

 

Component Code(s) 7451 7620

SUBJECT: 700 Series Articulated Trucks, Configuration of Dash Information Not Supported by Electronic Technician

PROBLEM:

Dash information on the listed machines cannot be changed from the factory settings when using Electronic Technician.

SOLUTION:

In order to change the dash information listed in Table 1, you need to use Electronic Technician, ET2004A (or later). Current versions of Electronic Technician, ET2003A or B, do not support the reconfiguration of the identified dash information on the listed machines.

Electronic Technician, ET2004A is in the process of distribution. Until you have a copy of ET2004A, you will not be able to change the identified dash information from the factory settings.

All other configuration settings, not identified in Table 1, for the listed machines should be supported by current versions of Electronic Technician.

Reference: Testing and Adjusting, RENR8036, "725, 730, 735, 740 and 740 EJECTOR Articulated Machines Monitor System", "Ground Speed Units ? Set", "Using AVSpare Electronic Technician to Change Ground Speed Display Units".

Dash Information Supported Only By ET2004A

Function

Description

Information Units Status

Available in the Configuration Screen. This function allows the user to set the speedometer to either mph or kph

Service Hour Meter

Available as the "Current Total" option in the "Information" dropdown menu. This function allows the user to adjust the value of the Service Hour Meter, but a factory password is required to make any changes.

COPYRIGHT 2004 AVSpare
ALL RIGHTS RESERVED

Information System:

Missing Oil Caps on Skid Steer Loaders and Multiterrain Loaders.
TRACK DRIVE PLANETARY FAILURES ON THE ASPHALT PAVERS
DRUM DRIVE PLANETARY FAILURES ON THE SOIL COMPACTORS
NEW ENGINE SOFTWARE FLASH FILES ARE NOW AVAILABLE TO ALLEVIATE UNKNOW OIL PRESSURE SENSOR WARNING INDICATIONS
700 Series Articulated Trucks, Brake Pressure Relief Valve Seal Failure, Fault Diagnosis
WEARING OF THE HOSES FOR THE HYDRAULIC OIL FILTER
HYDRAULIC TANK BREATHER HOSE MAY BE CRIMPED INSIDE THE ROPS POST
Air Filter Fouling on Panel
Valve Bonnets with Insufficient Hardness
REPLACE PLASTIC POPPET VALVE
HOSE WEAR FOR THE MANUAL LOWERING CONTROL VALVE HOSE MAY BE EXPERIENCED
POWER STUD MAY NOT BE ADEQUATELY COVERED TO PREVENT SHOCK HAZARD
Air Intake Tube Rubbing Hydraulic Oil Cooler Lines
OIL IN COOLANT DIAGNOSTIC FOR 3126B, 3126E, AND C7 ENGINES
Sealing for the Machine Electronic Control Module (IQAN) (XP2) and the Machine Electronic Control Module (IQAN) (XT2) Can Be Improved for the Track Feller Bunchers
SWL model 924G, 924Gz, 928Gz and IT28G ECM problems.
SERVICE PARTS AVAILABILITY FOR THE SR318, AND SR321 HIGH FLOW XPS SNOWBLOWERS IS DELAYED FOR CERTAIN COMPONENTS
LEFT TRACK RUBS FRAME ON SOME 247B AND 257B MULTI TERRAIN LOADERS
Trunnion Supports May Develop Cracks on Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders
221-1018 Engine ECM Problems
797 Cab Glass Can Break in Extreme Cold Weather
Paint on Cylinder Rods Can Cause seal Failure on Certain Backhoe Loaders, Integrated Toolcarriers, and Wheel Loaders
Warning Film For Falling Objects Guards (FOGS) For Certain Excavators
New PC Service Tool Software Released for Cellular Based Product Link (PL102C)