DAMAGE CAN OCCUR TO SEALS DURING INSTALLATION ON THE ECCENTRIC WEIGHT GROUP
[TIBU4445]
CONFIDENTIAL TIBU4445-00
Show/hide table
TECHNICAL INFORMATION BULLETIN |
January 12, 2005 |
ASPHALT COMPACTORS |
CB-434D (CNH1-Up) CB-534D (EAA1-Up) CB-534D (FGH1-Up) |
Component Code(s) 6606 |
SUBJECT: DAMAGE CAN OCCUR TO SEALS DURING INSTALLATION ON THE ECCENTRIC WEIGHT GROUP
PROBLEM:
Oil leaks from the vibratory pods.
SOLUTION:
If the vibratory pods are leaking at the following seals, replace the damaged seals with original parts. Care should be taken during assembly. Inspect for burrs prior to installing seals.
Show/hide table
Required Parts |
||
Part Number |
Description |
Quantity |
081-3814 |
Shift Shaft Seal |
1 |
188-9926 |
High Speed Seal |
1 or 2 |
Reference the pictures below to see the areas that could cause the seal to be damaged during assembly.
COPYRIGHT 2004 AVSpare
ALL RIGHTS RESERVED
Information System:
735, 740 and 740 EJECTOR Articulated Trucks, Hydraulic Test Lines May Fail
New PC Service Tool Software Released for Cellular Based Product Link (PL102C)
Warning Film For Falling Objects Guards (FOGS) For Certain Excavators
Paint on Cylinder Rods Can Cause seal Failure on Certain Backhoe Loaders, Integrated Toolcarriers, and Wheel Loaders
797 Cab Glass Can Break in Extreme Cold Weather
221-1018 Engine ECM Problems
Trunnion Supports May Develop Cracks on Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders
LEFT TRACK RUBS FRAME ON SOME 247B AND 257B MULTI TERRAIN LOADERS
SERVICE PARTS AVAILABILITY FOR THE SR318, AND SR321 HIGH FLOW XPS SNOWBLOWERS IS DELAYED FOR CERTAIN COMPONENTS
SWL model 924G, 924Gz, 928Gz and IT28G ECM problems.
Sealing for the Machine Electronic Control Module (IQAN) (XP2) and the Machine Electronic Control Module (IQAN) (XT2) Can Be Improved for the Track Feller Bunchers
OIL IN COOLANT DIAGNOSTIC FOR 3126B, 3126E, AND C7 ENGINES
PISTON SEAL CAN BE DAMAGED DURING ASSEMBLY ON CERTAIN LOAD HAUL DUMP MACHINES
Software Update for Product Link PL121SR (P/N 263-9088)
The Transmission Oil Filter Housing May Be Cracked on 834G Wheel Dozers, 836G Landfill Compactors, and 988G Wheel Loaders
Recall of Center Tread Idler Groups Back to the Factory, to Correct Deficient Parts and Incorrect Assembly Procedures on Certain Track-Type Tractors
A New Line Relief Valve Improves Controllability Of The Stick On Certain Excavators
A Hydraulic Tube and Hose Assembly May Develop Cracks on Certain 950GII and 962GII Wheel Loaders and IT62GII Integrated Toolcarriers
Product Link PL-300 ECM (Control Gp. P/N 239-9954)
INTERMITTENT ELECTRICAL PROBLEMS DUE TO MOISTURE IN JUMPER HARNESS CONNECTIONS IN CERTAIN SKID STEER LOADERS AND MULTI TERRAIN LOADERS
420D Backhoe Loader Pin-Lock Coupler Binding Issues
Blocked Oil Passages on the 3408, 3408C, G3408, 3412, 3412C, and G3412 Industrial and Commercial Engines
THE AVAILABILITY OF SERVICE PARTS AND PART MANUAL FOR BRUSH CUTTERS WILL BE DELAYED
Brakes May Not Function Correctly Under Certain Conditions on Certain Off-Highway Trucks