Control Valve (Lift)
`
938H Wheel Loader and IT38H <BR>Integrated Toolcarrier Hydraulic System
[RENR8995]
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Tilt)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Auxiliary)
HYDRAULIC SYSTEM
VALVE GP-CONTROL
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Tilt)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Lift)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Auxiliary)
Show/hide table
![]() | |
Illustration 1 | g01393076 |
(1) Control valve group (lift) |
Show/hide table
![]() | |
Illustration 2 | g01393077 |
View A-A |
(2) Torque for the valve group ... 16 ± 3 N·m (12 ± 2 lb ft)
(3) Torque for the plug ... 215 ± 20 N·m (159 ± 15 lb ft)
Show/hide table
![]() | |
Illustration 3 | g01393080 |
View (C-C) |
(4) Torque for the valve group ... 65 ± 7 N·m (48 ± 5 lb ft)
(5) 240-6017 Spring
- Free length ... 43.00 mm (1.693 inch)
- Outside diameter ... 16.00 mm (0.630 inch)
- Assembled length ... 27.00 mm (1.063 inch)
- Load at assembly ... 20.00 ± 1.4 N (4.50 ± 0.31 lb)
- Outside diameter ... 16.00 mm (0.630 inch)
(6) 2W-1776 Spring
- Free length ... 29.20 mm (1.150 inch)
- Outside diameter ... 11.43 mm (0.450 inch)
- Assembled length ... 24.00 mm (0.945 inch)
- Load at assembly ... 3.64 ± .4 N (0.82 ± 0.09 lb)
- Outside diameter ... 11.43 mm (0.450 inch)
(7) Torque for the valve group ... 65 ± 7 N·m (48 ± 5 lb ft)
(8) 240-1863 Spring
- Free length ... 44.75 mm (1.761 inch)
- Outside diameter ... 23.80 mm (0.937 inch)
- Assembled length ... 41.50 mm (1.634 inch)
- Load at assembly ... 149.50 ± 15.0 N (33.61 ± 3.37 lb)
- Outside diameter ... 23.80 mm (0.937 inch)
(9) Torque for the plug ... 190 ± 19 N·m (140 ± 14 lb ft)
(10) 240-1865 Spring
- Free length ... 47.42 mm (1.867 inch)
- Outside diameter ... 15.25 mm (0.600 inch)
- Assembled length ... 43.50 mm (1.713 inch)
- Load at assembly ... 70.50 ± 6.0 N (15.85 ± 1.35 lb)
- Outside diameter ... 15.25 mm (0.600 inch)
(11) Clearance for the stem within the valve body should be between 0.015 mm (0.0006 inch) and 0.020 mm (0.0008 inch).
(12) Torque for the valve group ... 100 ± 10 N·m (74 ± 7 lb ft)
Information System:
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Tilt)
3408E and 3412E Engines for Caterpillar Built Machines
Cooling Fan Control - Test
587R Pipelayer Machine Systems
Boom - Remove and Install
3412E Engine for Caterpillar Built Machines
Coolant Flow - Test
Reworking the Pressure Sensor for the Saw Pump{1408, 5057, 6543}
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Assemble
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Disassemble
The Fitting on the Air Cleaner Group is Installed Incorrectly on Specific Off-Highway Trucks{1051}
587R Pipelayer Machine Systems
Boom Winch, Hook Winch and Winch Frame - Install
587R Pipelayer Machine Systems
Boom Winch, Hook Winch and Winch Frame - Remove
AP655D and BG655D Asphalt Pavers Propel System
Hydraulic Schematic (Propel System) - Steel Track Machine
C4.4 and C6.6 Engines for Caterpillar Built Machines
Diagnostic Code Cross Reference
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Auxiliary)
R1600G Load Haul Dump Remote Control System
General Information
R1600G Load Haul Dump Remote Control System
Control Valve (Steering and Bucket)
R1600G Load Haul Dump Remote Control System
Machine Preparation for Troubleshooting
3412E Engine for Caterpillar Built Machines
Cooling Fan Speed - Test
587R Pipelayer Machine Systems
Main Control Valve - Remove
587R Pipelayer Machine Systems
Main Control Valve - Install
EquipmentManager Dealer Administrator Manual
Fault Codes
24M Motor Grader Power Train
Transmission Hydraulic Control
587R Pipelayer Machine Systems
Main Control Valve - Disassemble
3412E Engine for Caterpillar Built Machines
Electrical Power Supply - Test
587R Pipelayer Machine Systems
Main Control Valve - Assemble