R1600G Load Haul Dump Power Train Torque Converter and Updrive Caterpillar


Torque Converter and Updrive
`
R1600G Load Haul Dump Power Train [KENR6825]
POWER TRAIN
GEAR GP
R1600G Load Haul Dump Power Train Torque Converter and Updrive



Illustration 1g01806654

(1) Torque for the plug ... 75 ± 7 N·m (55 ± 5 lb ft)

(2) Torque for the two plugs ... 48 ± 5 N·m (35 ± 4 lb ft)

(3) Torque for the two bolts ... 50 ± 7 N·m (37 ± 5 lb ft)

(4) Torque for the two bolts ... 50 ± 7 N·m (37 ± 5 lb ft)

(5) Torque for the six bolts ... 50 ± 7 N·m (37 ± 5 lb ft)

(6) Torque for the nut ... 220 ± 15 N·m (160 ± 11 lb ft)

(7) Torque for the bolt ... 120 ± 20 N·m (90 ± 15 lb ft)

(8) Torque for the seven bolts ... 50 ± 7 N·m (37 ± 5 lb ft)

(9) Torque for the eight bolts ... 50 ± 7 N·m (37 ± 5 lb ft)

(10) Apply the 169-5464 Quick Cure Primer and then apply 154-9731 Thread Lock Compound prior to assembly.

Torque for the 12 bolts ... 74 ± 8 N·m (55 ± 6 lb ft)

(11) Thickness of 186-8848 Shim Pack ... 2.03 mm (0.080 inch)

Add shims as needed to get correct end play of gear (15) of ... 0.15 ± 0.05 mm (0.006 ± 0.002 inch)

(12) Apply 169-5464 Quick Cure Primer and then apply 155-0695 Thread Lock Compound prior to assembly.

Torque for the eight bolts ... 50 ± 7 N·m (37 ± 5 lb ft)

(13) Apply 169-5464 Quick Cure Primer and then apply 155-0695 Thread Lock Compound prior to assembly.

Torque for the bolt ... 135 ± 15 N·m (100 ± 11 lb ft)

(14) Lubricate the sealing lip lightly with the lubricant that is being sealed.

(17) Apply 169-5464 Quick Cure Primer and then apply 155-0695 Thread Lock Compound prior to assembly.

Torque for the four bolts ... 50 ± 7 N·m (37 ± 5 lb ft)

(18) Shims

Thickness of 165-9591 Shim ... 0.5 mm (0.020 inch)
Thickness of 165-9592 Shim ... 0.2 mm (0.008 inch)
Thickness of 165-9593 Shim ... 0.1 mm (0.004 inch)

Add shims as needed to get correct end play of gear (16) of ... 0.15 ± 0.05 mm (0.006 ± 0.002 inch)

Information System:

938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Ride Control Valve (2-Function, 3-Function Control Valve)
587R Pipelayer Machine Systems Pilot Control Valve - Install - Load, Boom and Counterweight
587R Pipelayer Machine Systems Pilot Control Valve - Remove - Load, Boom, and Counterweight
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
120K Motor Grader Capacities (Refill)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Relief Valve (Line)
120K Motor Grader Tire Shipping Pressure
2007/07/23 Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/02/11 An Improved Exhaust Piping Is Now Used on Track Skidders {1061, 1062}
120K Motor Grader Lifting and Tying Down the Machine
2007/11/19 Improvement to the Governor Control Groups {1265, 1276}
3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders Ether Starting Aid - Test
R1600G Load Haul Dump Machine Electrical System Circuit Breaker
R1600G Load Haul Dump Steering System Articulated Hitch
R1600G Load Haul Dump Power Train Output Transfer Gears - Adjust
C4.4 and C6.6 Engines for Caterpillar Built Machines Event Codes
C4.4 and C6.6 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
C18 Engine for Caterpillar Built Machines Component Location
R1600G Load Haul Dump Power Train Differential Pinion Preload - Adjust
R1600G Load Haul Dump Power Train Differential Backlash and Bearings - Adjust
R1600G Load Haul Dump Braking System Brake Release System
R1600G Load Haul Dump Braking System General Information
R1600G Load Haul Dump Braking System Service and Parking Brake System
C4.4 and C6.6 Engines for Caterpillar Built Machines E361 High Engine Coolant Temperature