R1600G Load Haul Dump Steering System Articulated Hitch Caterpillar


Articulated Hitch
`
R1600G Load Haul Dump Steering System [KENR6829]
FRAME AND BODY
HITCH GP
1.1. Upper Hitch
2.1. Lower Hitch

Upper Hitch




Illustration 1g01227977

(1) Apply 169-5464 Quick Cure Primer and then apply 155-0695 Thread Lock Compound to the bolt threads of the bolts prior to assembly.

Torque for the four bolts ... 120 ± 7 N·m (90 ± 5 lb ft)

(2) (9) Lubricate the sealing lips with the lubricant being sealed.

(3) (6) Apply 5P-3931 Anti-Seize Compound to the bearing cup bores prior to assembly.

(4) 1V-8848 Shim Pack

Thickness of the shim pack ... 2.5 mm (0.098 inch)

(5) (8) Lubricate bearing cones with SAE 30 oil prior to assembly.

The rolling torque for the bearing cones should be ... 2.3 to 13.6 N·m (20 to 120 lb in)

(7) Apply 169-5464 Quick Cure Primer and then apply 155-0695 Thread Lock Compound to the threads of the bolts prior to assembly.

Torque for the six bolts ... 80 ± 7 N·m (60 ± 5 lb ft)

Lower Hitch




Illustration 2g01227981

(1) Apply 169-5464 Quick Cure Primer and then apply 155-0695 Thread Lock Compound to the threads of the bolts prior to assembly.

Torque for the ten bolts ... 120 ± 7 N·m (90 ± 5 lb ft)

(2) (8) Lubricate the sealing lips with the lubricant being sealed.

(3) 5K-3489 Shim Pack

Thickness of the shim pack ... 2.03 ± 0.07 mm (0.080 ± 0.003 inch)

(4) (6) Apply 5P-3931 Anti-Seize Compound to the bearing cup bores prior to assembly.

(5) (7) Lubricate the bearing cones with SAE 30 oil prior to assembly.

The rolling torque for the bearing cones should be ... 11.3 to 39.5 N·m (100 to 350 lb in)

(9) Apply 169-5464 Quick Cure Primer and then apply 155-0695 Thread Lock Compound to the threads of the bolts prior to assembly.

Torque for the eight bolts ... 120 ± 7 N·m (90 ± 5 lb ft)

(10) Apply 169-5464 Quick Cure Primer and then apply 4C-9507 Retaining Compound to the threads of the bolts prior to assembly.

Torque for the four bolts ... 270 ± 13 N·m (200 ± 10 lb ft)

(11) 5K-3492 Shim Pack

Thickness of the shim pack ... 2.54 ± 0.076 mm (0.100 ± 0.003 inch)

Information System:

R1600G Load Haul Dump Machine Electrical System Circuit Breaker
R1600G Load Haul Dump Power Train Torque Converter and Updrive
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Ride Control Valve (2-Function, 3-Function Control Valve)
587R Pipelayer Machine Systems Pilot Control Valve - Install - Load, Boom and Counterweight
587R Pipelayer Machine Systems Pilot Control Valve - Remove - Load, Boom, and Counterweight
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
120K Motor Grader Capacities (Refill)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Relief Valve (Line)
120K Motor Grader Tire Shipping Pressure
2007/07/23 Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/02/11 An Improved Exhaust Piping Is Now Used on Track Skidders {1061, 1062}
120K Motor Grader Lifting and Tying Down the Machine
R1600G Load Haul Dump Power Train Output Transfer Gears - Adjust
C4.4 and C6.6 Engines for Caterpillar Built Machines Event Codes
C4.4 and C6.6 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
C18 Engine for Caterpillar Built Machines Component Location
R1600G Load Haul Dump Power Train Differential Pinion Preload - Adjust
R1600G Load Haul Dump Power Train Differential Backlash and Bearings - Adjust
R1600G Load Haul Dump Braking System Brake Release System
R1600G Load Haul Dump Braking System General Information
R1600G Load Haul Dump Braking System Service and Parking Brake System
C4.4 and C6.6 Engines for Caterpillar Built Machines E361 High Engine Coolant Temperature
C4.4 and C6.6 Engines for Caterpillar Built Machines E539 High Intake Manifold Air Temperature
160M and 160 Motor Grader Machine Systems Bank Valve - Install - Rear Frame