D350E Series II and D400E Series II Articulated Trucks Power Train Lockup Clutch and Solenoid Valve Caterpillar


Lockup Clutch and Solenoid Valve
`
1.1. 6I-9514 Lockup Clutch and Solenoid Valve or 173-8721 Lockup Clutch and Solenoid Valve

6I-9514 Lockup Clutch and Solenoid Valve or 173-8721 Lockup Clutch and Solenoid Valve




Illustration 1g00912494

6I-9514 Lockup Clutch and Solenoid Valve or 173-8721 Lockup Clutch and Solenoid Valve

(1) Torque for locknut ... 9.0 ± 0.5 N·m (6.64 ± 0.37 lb ft)

(2) Torque for cartridge assembly ... 50 ± 5 N·m (36.9 ± 3.7 lb ft)

(3) Torque for the plug ... 5.5 ± 1.5 N·m (4.06 ± 1.11 lb ft)

(4) Torque for the plug ... 5.5 ± 1.5 N·m (4.06 ± 1.11 lb ft)

(5) Torque for the plug ... 70 ± 7 N·m (51.6 ± 5.2 lb ft)

(6) Torque for the two plugs ... 5.5 ± 1.5 N·m (4.06 ± 1.11 lb ft)

(7) Torque for the bolt ... 30 ± 7 N·m (22.1 ± 5.2 lb ft)

(8) Torque for the bolt ... 30 ± 7 N·m (22.1 ± 5.2 lb ft)

(9) Torque for the plug ... 70 ± 7 N·m (51.6 ± 5.2 lb ft)

(10) Torque for the plug ... 70 ± 7 N·m (51.6 ± 5.2 lb ft)

(11) Torque for the three plugs ... 25 ± 5 N·m (18.4 ± 3.7 lb ft)

(12) Torque for the three bolts ... 48 ± 7 N·m (35.4 ± 5.2 lb ft)

(13) Torque for the four bolts ... 30 ± 7 N·m (22.1 ± 5.2 lb ft)

(14) Torque for the plug ... 5.5 ± 1.5 N·m (4.06 ± 1.11 lb ft)

(15) Torque for the plug ... 30 ± 3 N·m (22.1 ± 2.2 lb ft)

(16) Torque for the plug ... 5.5 ± 1.5 N·m (4.06 ± 1.11 lb ft)

(17) Torque for the two bolts ... 30 ± 4 N·m (22.1 ± 3.0 lb ft)

(18) Torque for the plug ... 5.5 ± 1.5 N·m (4.06 ± 1.11 lb ft)

(19) 8E-0758 Spring Red Stripe

Length under test force ... 65.36 mm (2.573 inch)
Test force ... 250.9 ± 7.5 N (56.41 ± 1.69 lb)
Free length after test ... 91.38 mm (3.598 inch)
Outside diameter ... 14.732 mm (0.5800 inch)

(20) 9D-7884 Spring

Length under test force ... 18.62 mm (0.733 inch)
Test force ... 162 N (36.3 lb)
Free length after test ... 23.9 mm (0.94 inch)
Outside diameter ... 15.786 mm (0.6215 inch)

(21) 9P-0683 Spring

Length under test force ... 25.4 mm (1.00 inch)
Test force ... 35.6 ± 2.8 N (8.00 ± .60 lb)
Free length after test ... 66.04 mm (2.600 inch)
Outside diameter ... 21.4 mm (.84 inch)

(22) 9W-7410 Spring

Color code ... Three light blue stripes
First test:
Length under test force ... 79.5 mm (3.13 inch)
Test force ... 78 ± 4 N (18 ± 1 lb)
Second test
Length under test force ... 63.0 mm (2.48 inch)
Test force ... 159.0 ± 4.8 N (35.75 ± 1.08 lb)
Free length after test ... 87.6 mm (3.45 inch)
Outside diameter ... 14.732 mm (0.5800 inch)

(23) Shims

Thickness of one 8J-4452 Shim ... 0.12 mm (0.005 inch)
One 8J-4452 Shim will change the pressure approximately. ... 33 kPa (5.0 psi)
Thickness of one 2S-0675 Shim ... 0.40 mm (0.016 inch)
One 2S-0675 Shim will change the pressure approximately. ... 77 kPa (11 psi)
Thickness of one 9J-1330 Shim ... 0.79 mm (.031 inch)
One 9J-1330 Shim will change the pressure approximately. ... 143 kPa (21 psi)

(24) Shims

Thickness of one 5J-2721 Shim ... 0.13 mm (0.005 inch)
One 5J-2721 Shim will change the pressure approximately. ... 13 kPa (2.0 psi)
Thickness of one 6J-3993 Shim ... 0.25 mm (0.010 inch)
One 6J-3993 Shim will change the pressure approximately. ... 26 kPa (4.0 psi)
Thickness of one 5J-1036 Shim ... 0.8 mm (0.03 inch)
One 5J-1036 Shim will change the pressure approximately. ... 81 kPa (12 psi)

(25) 8P-9738 Load Piston Orifice

Orifice thickness ... 4.58 mm (0.180 inch)

(26) 144-6292 Solenoid Valve Gp

Information System:

3524B Engine for Caterpillar Built Machines Fuel Transfer Pump - Remove
3524B Engine for Caterpillar Built Machines Coupling Pump - Install
2002/11/25 A New Alternator Guard is Used {1405}
R1600G Load Haul Dump Hydraulic System Lift and Tilt Cylinder Speed - Check
R1600G Load Haul Dump Hydraulic System Lift and Tilt Cylinder Drift - Check
938G Wheel Loader, 938G Series II <BR>Wheel Loader, IT38G <BR>Integrated Toolcarrier and IT38G Series II <BR>Integrated Toolcarrier Traction Control System MID 028 - CID 0296 - FMI 09
226 and 242 Skid Steer Loaders Power Train Piston Motor (Hydrostatic) - Install
D350E Series II and D400E Series II Articulated Trucks Power Train Relief Valve (Torque Converter Outlet)
2002/08/12 Correction to Disassembly and Assembly , "Differential and Bevel Gear - Assemble" {3256, 3258}
PS-360B Paving Compactor Fuses - Replace
3508B Engine for D11R Track-Type Tractors Engine Cooling Fan Bypass Solenoid
938G Wheel Loader, 938G Series II <BR>Wheel Loader, IT38G <BR>Integrated Toolcarrier and IT38G Series II <BR>Integrated Toolcarrier Traction Control System MID 028 - CID 0263 - FMI 01
R2900 Load Haul Dump Safety Signs and Labels
797 Off-Highway Truck Engine Supplement Fuel Transfer Pump - Install
Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Main Control Valve - Integrated Toolcarrier
784C and 785C Off-Highway Truck/Tractors Steering System Steering Accumulator - Test and Charge
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0605 - FMI 02
3524B Engine for Caterpillar Built Machines Exhaust Manifold - Remove and Install
A Procedure for Installation of the Rotor Drive is Available{5611}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Operational Checks (Power Train)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Operational Checks (Brake, Hydraulic Fan System)
R1600G Load Haul Dump Steering System Neutralizer Valve (Implement and Steering) - Test and Adjust
R1600G Load Haul Dump Hydraulic System Relief Valve (Main) - Test and Adjust