![]() | |
Illustration 1 | g00913744 |
(1) Torque for the four bolts ... 48 ± 4 N·m (35.0 ± 3.0 lb ft)
(2) Torque for the two nuts ... 34 ± 4 N·m (25.0 ± 3.0 lb ft)
(3) Torque for the one nut ... 34 ± 4 N·m (25.0 ± 3.0 lb ft)
(4) Remove the plugs from pressure ports "P1" and "P2". Install one 8E-3077 Adapter in each pressure port. Torque each adapter to 12 ± 4 N·m (106.0 ± 35.0 lb in).
(5) Torque for the 26 bolts ... 30 ± 4 N·m (22.0 ± 3.0 lb ft)
![]() | |
Illustration 2 | g00913747 |
(6) Torque for the position sensor for the transmission gear ... 12 ± 4 N·m (106.0 ± 35.0 lb in)
(7) Before assembly, apply 5P-3413 Pipe Sealant to the spot face for the washer.
(8) Before assembly, apply 5P-3413 Pipe Sealant to the threads and the three bolts. To ensure that no sealant leaks from below the pins, the cam pin and the lever pin must contact the housing before you install the bolts.
![]() | |
Illustration 3 | g00913751 |
(9) Install the plug without sealant.