Clutch (Forward High and Forward Low)
`
938G Series II Wheel Loader and IT38G Series II <BR>Integrated Toolcarrier Power Train
[RENR6065]
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Transmission Control Valve
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Clutch (Reverse and Second)
POWER TRAIN
TRANSMISSION GP
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Clutch (Forward High and Forward Low)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Clutch (Reverse and Second)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Clutch (First and Third)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Transmission Case
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Clutch (Reverse and Second)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Clutch (Forward High and Forward Low)
Show/hide table
![]() | |
Illustration 1 | g00953243 |
Typical Example |
Note: The following dimensions for the thickness of new clutch discs and of new clutch plates do not include the running clearance of the clutch pack. To measure the running clearance, refer to Testing and Adjusting, RENR6067, "Transmission Clutch Running Clearance - Check".
(1) Forward Low Clutch Pack
- Thickness of eight new clutch discs, seven new clutch plates, and one new end plate for the Forward Low Clutch ... 56.00 ± 1.28 mm (2.205 ± .050 inch)
- Thickness of one new 8E-2153 Friction Disc Assembly ... 4.00 ± 0.08 mm (.157 ± .003 inch)
- Minimum allowable thickness for reusability ... 3.80 mm (.149 inch)
- Thickness of one new 6Y-8512 Plate ... 3.00 ± 0.08 mm (.118 ± .003 inch)
- Thickness of one new 6Y-8514 End Plate ... 8.00 ± 0.08 mm (.315 ± .003 inch)
- Thickness of one new 8E-2153 Friction Disc Assembly ... 4.00 ± 0.08 mm (.157 ± .003 inch)
(2) Forward High Clutch Pack
- Thickness of five new clutch discs, five new clutch plates, and one new end plate for the Forward High Clutch ... 35.00 ± 0.8 mm (1.378 ± .031 inch)
- Thickness of one new 6Y-7922 Friction Disc ... 4.00 ± 0.08 mm (.157 ± .003 inch)
- Minimum allowable thickness for reusability ... 3.80 mm (.149 inch)
- Thickness of one new 6Y-8512 Plate ... 3.00 ± 0.08 mm (.118 ± .003 inch)
- Thickness of one new 6Y-8514 End Plate ... 8.00 ± 0.08 mm (.315 ± .003 inch)
- Thickness of one new 6Y-7922 Friction Disc ... 4.00 ± 0.08 mm (.157 ± .003 inch)
(3) Depth for installation of sleeve bearing ... 1.0 ± 0.3 mm (.039 ± .012 inch)
(4) Bearing and Shaft
- Diameter of the bearing after assembly ... 65.046 ± 0.039 mm (2.5609 ± .0015 inch)
- Diameter of the shaft in bearing area ... 64.961 ± 0.010 mm (2.5575 ± .0004 inch)
(5) Bearing and Shaft
- Diameter of the bearing after assembly ... 65.046 ± 0.039 mm (2.5609 ± .0015 inch)
- Diameter of the shaft in bearing area ... 64.961 ± 0.010 mm (2.5575 ± .0004 inch)
(6) Seal ring end clearance
- End clearance for the three seal rings ... 0.70 ± 0.20 mm (0.028 ± 0.008 inch)
Information System:
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0612 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0612 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0612 - FMI 03
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0611 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0611 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0611 - FMI 03
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0610 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0610 - FMI 05
797 Off-Highway Truck Engine Supplement
Engine Oil Cooler - Remove
D250E Series II and D300E Series II Articulated Trucks Power Train
Transmission Hydraulic Control
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0610 - FMI 03
R1600 Load Haul Dump Machine Electrical System
Hydraulic Oil Temperature
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Clutch (Reverse and Second)
3524B Engine for Caterpillar Built Machines
Engine Oil Cooler - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Clutch (First and Third)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Monitoring System
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Transmission Case
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement
Engine, Torque Converter, Transmission and Output Transfer Gears - Remove
2002/08/19
Correction to Operation and Maintenance Manual , "Caterpillar Monitoring System" {7451, 7490}
2002/08/19
Correction to Operation and Maintenance Manual , "Caterpillar Monitoring System" {7451, 7490}
D250E Series II and D300E Series II Articulated Trucks Power Train
Selector and Pressure Control Valve
3524B Engine for Caterpillar Built Machines
Engine Oil Cooler - Disassemble
R2900 Load Haul Dump
Engine Start Switch
R2900 Load Haul Dump
Fire Suppression System (Foam) - If Equipped