938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Transmission Case Caterpillar


Transmission Case
`



Illustration 1g00913843

Rear View

(1) Torque for the two bolts ... 55 ± 10 N·m (40 ± 7 lb ft)

(2) Torque for the five bolts ... 28 ± 7 N·m (21 ± 5 lb ft)

(3) Torque for the four bolts ... 100 ± 20 N·m (75 ± 15 lb ft)

(4) Torque for the ten bolts ... 100 ± 20 N·m (75 ± 15 lb ft)




Illustration 2g00913846

Front View

(5) Torque for the plug ... 100 ± 20 N·m (75 ± 15 lb ft)

(6) Torque for the two bolts ... 55 ± 10 N·m (40 ± 7 lb ft)

(7) Torque for the 25 bolts ... 55 ± 10 N·m (40 ± 7 lb ft)

(8) Torque for the three bolts ... 28 ± 7 N·m (21 ± 5 lb ft)

(9) Torque for the plug ... 90 ± 15 N·m (67 ± 11 lb ft)




Illustration 3g00913848

Right Side View

(10) Torque for the breather ... 35 N·m (25 lb ft)




Illustration 4g00916267

View A-A




Illustration 5g00916842

View B-B

(11) Torque for the plug ... 35 ± 3 N·m (26 ± 2 lb ft)

(12) 8E-5261 Shim Pack

Total thickness of the shim pack ... 3.5 mm (.138 inch)
Thickness of fifteen shims ... 0.05 mm (.002 inch)
Thickness of nine shims ... 0.30 mm (.012 inch)

(13) Torque for the six bolts ... 55 ± 10 N·m (40 ± 7 lb ft)

(14) Torque for the plug ... 35 ± 3 N·m (26 ± 2 lb ft)




Illustration 6g00916849

View C-C

(15) Torque for the plug ... 35 ± 3 N·m (26 ± 2 lb ft)




Illustration 7g00953342

(16) Relief Valve (Torque Converter Inlet)

Note: Lubricate the O-ring on relief valve (16) with the lubricant that is being sealed before installation.

Information System:

120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Monitoring System
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Clutch (First and Third)
3524B Engine for Caterpillar Built Machines Engine Oil Cooler - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Clutch (Reverse and Second)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Clutch (Forward High and Forward Low)
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0612 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0612 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0612 - FMI 03
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0611 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0611 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0611 - FMI 03
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0610 - FMI 06
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Engine, Torque Converter, Transmission and Output Transfer Gears - Remove
2002/08/19 Correction to Operation and Maintenance Manual , "Caterpillar Monitoring System" {7451, 7490}
2002/08/19 Correction to Operation and Maintenance Manual , "Caterpillar Monitoring System" {7451, 7490}
D250E Series II and D300E Series II Articulated Trucks Power Train Selector and Pressure Control Valve
3524B Engine for Caterpillar Built Machines Engine Oil Cooler - Disassemble
R2900 Load Haul Dump Engine Start Switch
R2900 Load Haul Dump Fire Suppression System (Foam) - If Equipped
143H and 163H Motor Graders All Wheel Drive Location of Electrical Components
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0613 - FMI 03
3524B Engine for Caterpillar Built Machines Engine Oil Cooler - Assemble
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0613 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0613 - FMI 06