Note: Clean all bores. Bores must be free of rust. Bores must be free of paint. A maximum thickness of 0.025 mm (0.001 inch) primer paint is permitted.
Note: The internal threads and the external threads must be free of primer paint. The internal threads and the external threads must be free of finish paint.
206-3820 Quick Coupler
![]() | |
Illustration 1 | g00904185 |
(1) 192-2645 Springs
- Free length after test ... 88.9 mm (3.5 inches)
- Force of the spring ... 30.7 N·m (22.6 lb ft)
- Direction of the coils ... Right hand
- Outside diameter ... 32.1 mm (1.26 inches)
- Force of the spring ... 30.7 N·m (22.6 lb ft)
(2) Before assembly, apply 5P-0960 Molybdenum Grease to the two 192-2642 Pins.
(3) Diameter of the four holes ... 32.2 ± .025 mm (1.27 ± 0.001 inch)
(4) Diameter of the four holes ... 32.2 ± .025 mm (1.27 ± 0.001 inch)
(5) Length for the 159-5797 Springs after assembly 28 mm (1.1 inches)
- Free length after test ... 36.2 mm (1.43 inches)
- Force of the spring ... 275.0 N·m (202.8 lb ft)
- Direction of the coils ... Right hand
- Outside diameter ... 31.75 mm (1.25 inches)
- Force of the spring ... 275.0 N·m (202.8 lb ft)
206-3821 Quick Coupler (Hydraulic)
![]() | |
Illustration 2 | g00915445 |
(1) 192-2645 Springs
- Free length after test ... 88.9 mm (3.5 inches)
- Force of the spring ... 30.7 N·m (22.6 lb ft)
- Direction of the coils ... Right hand
- Outside diameter ... 32.1 mm (1.26 inches)
- Force of the spring ... 30.7 N·m (22.6 lb ft)
(2) Before assembly, apply 5P-0960 Molybdenum Grease to the two 192-2642 Pins.
(3) Diameter of the four holes ... 32.2 ± .025 mm (1.27 ± 0.001 inch)
(4) Diameter of the four holes ... 32.2 ± .025 mm (1.27 ± 0.001 inch)