CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Propel System Drum Drive Group Caterpillar


Drum Drive Group
`
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Propel System [KENR3615]
POWER TRAIN
DRIVE GP
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Propel System Drum Drive Group
1.1. CB-534D
2.1. CB-564D

CB-534D




Illustration 1g00921551

(A) Front Drum

(B) Rear Drum

Apply 9S-3263 Thread Lock Compound to the threads of 17 bolts (1) .

Apply 9S-3263 Thread Lock Compound to the threads of 22 bolts (2) .

Apply 9S-3263 Thread Lock Compound to 24 bolts (3) .

Apply 9S-3263 Thread Lock Compound to 17 bolts (4) .

Apply 9S-3263 Thread Lock Compound to 22 bolts (5) .

Apply 9S-3263 Thread Lock Compound to 24 bolts (6) .

(7) Torque for the ten bolts ... 680 ± 60 N·m (500 ± 44 lb ft)

(8) Torque for the ten bolts ... 680 ± 60 N·m (500 ± 44 lb ft)

Position connector (9) to dimension (C). Dimension (C) is 15 ± 2 degrees.

Position connector (10) to dimension (D). Dimension (D) is 25 ± 2 degrees.

CB-564D




Illustration 2g01214235

Apply 9S-3263 Thread Lock Compound to the threads of 17 bolts (1) .

Apply 9S-3263 Thread Lock Compound to the threads of 22 bolts (2) .

Apply 9S-3263 Thread Lock Compound to 24 bolts (3) .

Apply 9S-3263 Thread Lock Compound to 17 bolts (4) .

Apply 9S-3263 Thread Lock Compound to 22 bolts (5) .

Apply 9S-3263 Thread Lock Compound to 24 bolts (6) .

(7) Torque for the ten bolts ... 680 ± 60 N·m (500 ± 44 lb ft)

(8) Torque for the ten bolts ... 680 ± 60 N·m (500 ± 44 lb ft)

The top dead center bolt (9) must be removed on machines that are equipped with the Versa Vibe option.

(10) Align the filler plug and the drain plug.

Position connector (11) to dimension (A). Dimension (A) is 25 ± 2.

(12) Locate top dead center hole on the support "hole number one". Count in the counterclockwise direction to "hole number five". Align this hole with the brake port on the gearbox.

(13) Align the filler plug and the drain plug.

(14) Locate top dead center hole on the support "hole number one". Count in the clockwise direction to "hole number six". Align this hole with the brake port on the gearbox.

Position connector (15) to dimension (B). Dimension (B) is 15 ± 2.

(16) Align the filler plug and the drain plug.

Information System:

CB-634D Paving Compactor Machine Electronic Control System Water Spray Is Always Off
3054E Industrial Engine Engine Oil Filter
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement Radiator - Install
561N Pipelayer Plate Locations and Film Locations
120H and 135H Motor Graders Safety Messages
561N Pipelayer Specifications
12H Motor Grader Reference Material
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Steering System Piston Pump (Steering) Margin Pressure - Test and Adjust
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Steering System Piston Pump (Steering) Low Pressure Standby - Test
120H and 135H Motor Graders Machine Systems Air Control Valve (Parking Brake) - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Steering System Steering System Pressure (High Pressure Stall) - Test
R2900 Load Haul Dump Steering and Transmission Lock Control (STIC Steering)
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Service Brakes and Retarder System Leakage - Check
216 and 232 Skid Steer Loaders 3024 Engine Supplement Pump Mounting - Remove and Install
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Features
554 and 574 Forwarders Power Train Gearshift Pressures - Test - 574 Forwarder 1FM434-UP
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Service Brakes and Retarder System Pressure - Test
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Proportional Pressure Solenoid Valve - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Electronic Control Module (Power Train)
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Radiator and Hydraulic Oil Cooler
Bench Test Procedure for a 784B, 784C, 785, 785B, 785C,785D, 789, and 789B Off-Highway Truck Transmission{3030, 3073}
226 and 242 Skid Steer LoadersEngine Supplement Pump Mounting - Remove and Install
2002/11/11 New Mirror Has Improved Durability and a New Support that Reduces Vibration {7319}
R2900 Load Haul Dump Steering Control