938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Window Wiper and Wiper Motor Caterpillar


Window Wiper and Wiper Motor
`
938G Series II Wheel Loader and IT38G Series II <BR>Integrated Toolcarrier Machine Systems [RENR6080]
OPERATOR STATION
WIPER GP-WINDOW
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Window Wiper and Wiper Motor
1.1. Wiper Groups
2.2. Window Wiper and Wiper Motor (Tapered Shaft)
3.3. Tapered Shaft for the Motor Drive
4.2. Window Wiper and Wiper Motor (Straight Shaft)
5.3. Straight Shaft for the Motor Drive
6.1. The Location of the Wiper Arms

Wiper Groups




Illustration 1g01444788

View from the Left Side of the Cab




Illustration 2g00751519

Window Wiper and Wiper Motor (Tapered Shaft)

Type 1




Illustration 3g01444810



Illustration 4g01444802

(1) Torque for the nut ... 20 ± 3 N·m (15 ± 2 lb ft)

The tension of the arm in the loaded position ... 7.5 ± 0.5 N (1.70 ± .10 lb)

(2) Torque for the nut ... 12 ± 3 N·m (106 ± 26 lb in)

The tension of the arm in the loaded position ... 5 ± .5 N (1.1 ± 0.10 lb)

(3) Torque for the nut ... 2.5 ± .5 N·m (22 ± 4 lb in)

Tapered Shaft for the Motor Drive




Illustration 5g01444871

6-Pin Connector

(1) Open

(2) Ground

(3) Park Position

(4) Low Speed

(5) High Speed

(6) Battery Voltage

(4) Torque for the nut ... 19 ± 1 N·m (14 ± 0.7 lb ft)

(5) Torque for the mounting hardware ... 6 ± 1 N·m (53 ± 9 lb in)

(M) Wiper Motor

Window Wiper and Wiper Motor (Straight Shaft)

Type 2




Illustration 6g01444915

(6) Torque for the nut ... 20 ± 3 N·m (14.7 ± 2.2 lb ft)

The tension of the arm in the loaded position ... 7.5 ± 0.5 N (1.7 ± .1 lb)

(7) Torque for the nut ... 12 ± 3 N·m (106 ± 27 lb in)

The tension of the wiper arm in the loaded position ... 5 ± 1 N (1.1 ± 0.1 lb)

(3) Torque for the nut ... 2.5 ± 0.5 N·m (22 ± 4 lb in)

Straight Shaft for the Motor Drive




Illustration 7g01444945

6-Pin Connector

(1) Open

(2) Ground

(3) Park Position

(4) Low Speed

(5) High Speed

(6) Battery Voltage

(8) Torque for the nut ... 19 ± 1 N·m (170 ± 9 lb in)

(9) Torque for the mounting ... 6 ± 1 N·m (53 ± 9 lb in)

(M) Wiper Motor

The Location of the Wiper Arms




Illustration 8g00751613

View from the Front of the Cab

Note: Callout (C) represents the edge of the windshield.

(D) The minimum distance from the edge of the window (C) to the front wiper should be 60 mm (2.4 inch) in the park position.

(E) The maximum distance from the edge of the window (C) to the front wiper should be 110 mm (4.3 inch) in the park position.

(F) The rear window wiper is parked on the rear window within 5 degrees from the vertical position.

Note: The location of the window wiper blade are similar for each wiper arm assembly.

Information System:

776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Pressure Switch (Service Brake and Retarder)
2002/09/02 New Tachometers Provide Increased Service Life {7462}
2002/11/18 New High Pressure Oil Hose Assembly Offers Added Flexibility for Thermal Expansion {1714, 7554}
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Transmission Control
120H and 135H Motor Graders Machine Systems Air Control Valve (Parking Brake) - Assemble
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Hydraulic Tank (Torque Converter, Hoist, Brake, and Transmission)
R2900 Load Haul Dump Autodig System - If Equipped
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Pump - Remove
R2900 Load Haul Dump Joystick Control
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Main Control Valve
Air Conditioning and Heating R-12 All Caterpillar Machines Refrigerant Orifice Tube - Remove and Install
Air Conditioning and Heating R-12 All Caterpillar Machines Receiver-Dryer - Remove and Install
554 and 574 Forwarders Power Train Power Train Charge System Pressure - Test - 574 Forwarder (1FM434-UP)
226 and 242 Skid Steer LoadersEngine Supplement Engine - Install
R2900 Load Haul Dump Bucket Control Group Safety Pins
R2900 Load Haul Dump Walk-Around Inspection
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Pump - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Kickout System - Integrated Toolcarriers
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System Machine Preparation for Troubleshooting
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Remove
554 and 574 Forwarders Power Train Hydrostatic Drive System Performance - Test
Field Installation of the 222-5721 Cab Heater and Mounting Gp {7304}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Install
AP-655C and BG-2255C Asphalt Pavers Machine Systems Introduction (Auxiliary System)