Rear Drive Shaft
`
D350E Series II and D400E Series II Articulated Trucks Power Train
[SENR9137]
D350E Series II and D400E Series II Articulated Trucks Power Train
Final Drive and Wheel
D350E Series II and D400E Series II Articulated Trucks Power Train
Selector and Pressure Control Valve
POWER TRAIN
SHAFT GP
D350E Series II and D400E Series II Articulated Trucks Power Train
Rear Drive Shaft
1.1. 161-3250 Rear Shaft Group and 139-1018 Rear Shaft Group
2.2. 172-8551 Universal Joint and 174-4019 Universal Joint
3.2. 172-4455 Universal Joint Center Shaft
161-3250 Rear Shaft Group and 139-1018 Rear Shaft Group
Show/hide table
![]() | |
Illustration 1 | g00917736 |
The center shaft and the rear shaft are included in the rear shaft group. |
172-8551 Universal Joint and 174-4019 Universal Joint
Show/hide table
![]() | |
Illustration 2 | g00921612 |
Rear Drive Shaft |
(1) Torque for the 8 bolts ... 135 ± 20 N·m (99.6 ± 14.8 lb ft)
(2) Torque for the 8 bolts ... 135 ± 20 N·m (99.6 ± 14.8 lb ft)
172-4455 Universal Joint Center Shaft
Show/hide table
![]() | |
Illustration 3 | g00921611 |
Center Drive Shaft |
(3) Torque for the 8 bolts ... 135 ± 20 N·m (99.6 ± 14.8 lb ft)
(4) Torque for the 8 bolts ... 135 ± 20 N·m (99.6 ± 14.8 lb ft)
Information System:
120H and 135H Motor Graders Machine Systems
Bank Valve - Disassemble - Bank Valve with Hydraulic Detent
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Air Compressor - Remove and Install
2002/11/18
A New Drum Propel Motor and Final Drive Is Now Used on Certain Vibratory Soil Compactors {4351, 6605}
R2900 Load Haul Dump
Loading, Hauling and Dumping
R2900 Load Haul Dump
Operating Technique Information
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Water Pump - Install
R2900 Load Haul Dump
Engine and Machine Warm-Up
R2900 Load Haul Dump
Engine Starting with Auxiliary Start Receptacle
140H and 160H Motor Graders Engine Supplement
Refrigerant Compressor - Remove and Install
R2900 Load Haul Dump
Engine Starting with Jump Start Cables
Hitch Bore and Steering Cylinder Bore Dimensions for Wheel Skidders and Feller Bunchers{4303, 7051}
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes
Brake Hydraulic System
12H Motor Grader Engine Supplement
Refrigerant Condenser - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Lift Kickout - Adjust - Integrated Toolcarrier
140H and 160H Motor Graders Engine Supplement
Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Work Tool Positioner - Adjust - Integrated Toolcarrier
550, 570 and 580 Wheel Harvesters
Safety Messages
550, 570 and 580 Wheel Harvesters
Specifications
D350E Series II and D400E Series II Articulated Trucks Power Train
Selector and Pressure Control Valve
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Front Steering) - Remove and Install
550, 570 and 580 Wheel Harvesters
Maintenance Interval Schedule
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Transmission Oil Cooler - Remove and Install
3524B Engine for Caterpillar Built Machines
Bearing Clearance - Check
320B, 320B L and 320B N Excavators
Reference Material