3054E Industrial Engine Front Housing and Covers Caterpillar


Front Housing and Covers
`


Illustration 1g00995663
Alignment


Illustration 2g00918672
Front cover

Table 1
Callout  Quantity  Part  Specification Description 
Alignment  The front housing must be aligned to the cylinder block face. + 0.05 to minus 0.05 mm (+ 0.0020 to minus 0.0020 inch ) 
Front cover  Tighten the bolts that fasten the front cover to the front housing to the following torque. 22 N·m (16 lb ft) 
Water pump  Tighten the bolts that fasten the water pump to the front housing to the following torque. 22 N·m (16 lb ft) 

Note: Refer to Specifications, "Water Pump" for the correct bolt tightening sequence for the water pump.

Information System:

IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader MID 081 - CID 0070 - FMI 03
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Pilot Valve (Joystick)
3524B Engine for Caterpillar Built Machines Fuel Transfer Pump - Assemble
C9 Engine For Caterpillar Built Machines Engine Oil Pump - Remove
14H Motor Grader 3176C Engine Supplement Air Compressor - Remove
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Electrical Components
574B Forwarder Hydraulic System Steering Cylinder Pressure - Test and Adjust
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Air Inlet Manifold - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
AP555E and BG555E Asphalt Pavers Machine Systems Hydraulic Cylinder (Truck Hitch)
140H and 160H Motor Graders Engine Supplement Air Cleaner - Remove and Install
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader MID 081 - CID 0070 - FMI 04
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Turbocharger - Disassemble
14H Motor Grader 3176C Engine Supplement Air Compressor - Install
3054E Industrial Engine Gear Group (Front)
574B Forwarder Hydraulic System Boom Tilt Cylinder and Gate Cylinder (Horizontal) Pressure - Test and Adjust
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Piston Pump (Hydraulic Fan)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Oscillating Axle Housing
247 and 257 Multi Terrain Loaders Power Train Piston Motor (Hydrostatic) - Remove
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader MID 081 - CID 0248 - FMI 12
CB-534D and CB-564D Asphalt Compactors Cooling System Water Temperature Regulator - Replace
574B Forwarder Hydraulic System Grapple Cylinder Pressure - Test and Adjust
2002/11/04 A New Control Valve Improves the Service Life of the Transmission {3073}