R1600 Load Haul Dump Machine Electrical System Transmission Oil Temperature Caterpillar


Transmission Oil Temperature
`

The components of the transmission oil temperature circuit are the transmission (t/c) oil temperature sensor, the AVSpare Monitoring System and the transmission oil temperature gauge.




Illustration 1g01020049

View of torque converter

(1) Transmission (t/c) oil temperature sensor




Illustration 2g00913116

Dash panel

(2) AVSpare Monitoring System




Illustration 3g00913545

Dash panel

(3) Transmission oil temperature gauge

With the key start switch in the ON position, 24 volt power is supplied from the batteries via circuit breaker #1 to the AVSpare Monitoring System. The AVSpare Monitoring System supplies 8 volt power to the transmission (t/c) oil temperature sensor.

Transmission (t/c) oil temperature sensor (1) sends a Pulse Width Modulated (PWM) signal to AVSpare Monitoring System (2). The transmission (t/c) oil temperature is displayed on transmission oil temperature gauge (3).




Illustration 4g01020050

Transmission oil temperature circuit

Information System:

R1600 Load Haul Dump Machine Electrical System Actual Gear Indicator
R1600 Load Haul Dump Machine Electrical System Engine Shutdown
R2900 Load Haul Dump Model Views and Specifications
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Location of Components
3524B Engine for Caterpillar Built Machines Coupling Oil Filter Base - Assemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System General Information - Integrated Toolcarrier
3524B Engine for Caterpillar Built Machines Coupling Oil Filter Base - Disassemble
3524B Engine for Caterpillar Built Machines Coupling Oil Filter Base - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Torque Converter
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Differential and Final Drive
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Transmission
R2900 Load Haul Dump Fire Extinguisher Location
Installation Procedure for the New Traction Control System{5051}
3524B Engine for Caterpillar Built Machines Engine Oil Pump - Remove
D350E Series II and D400E Series II Articulated Trucks Power Train Priority Valve
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Capacities (Refill)
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0606 - FMI 02
554 and 574 Forwarders Power Train Filling and Flushing the Hydrostatic System - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Introduction
3524B Engine for Caterpillar Built Machines Engine Oil Pump - Install
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0607 - FMI 02
R2900 Load Haul Dump Plate Locations and Film Locations
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0608 - FMI 02
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0609 - FMI 03