R1600 Load Haul Dump Machine Electrical System Lift Arm Positioner Caterpillar


Lift Arm Positioner
`

The components of the lift arm positioner circuit are the lift arm positioner switch, the bucket positioner solenoid, the lift arm positioner magnetic switch and the magnet.




Illustration 1g00913562

Dash panel

(1) Lift arm positioner switch




Illustration 2g00913563

View of hitch

(2) Bucket positioner solenoid




Illustration 3g00913565

View of lift arm

(3) Lift arm positioner magnetic switch

(4) Magnet

With the key start switch in the ON position, 24 volt power is supplied from the batteries via circuit breaker #4 to the lift arm positioner switch, to the bucket positioner solenoid, and to the lift arm positioner magnetic switch.

When lift arm positioner switch (1) is in the ON position, 24 volt power is supplied to bucket positioner solenoid (2). When lift arm magnet (4) passes lift arm positioner magnetic switch (3) a signal is generated within the lift arm positioner magnetic switch. The lift arm positioner magnetic switch closes a set of contacts within the switch. The bucket positioner solenoid will energize.

When the lift arm lowers the magnet passes the lift arm positioner magnetic switch, the lift arm positioner magnetic switch contacts will open circuit and the bucket positioner solenoid will de-energize.




Illustration 4g01019788

Lift arm positioner circuit

Information System:

R1600 Load Haul Dump Machine Electrical System Torque Converter Lockup Control
TK711, TK721, TK722 and TK732 Track Feller Bunchers Specifications
R2900 Load Haul Dump Battery Disconnect Switch
PMG3516 Power Module Roading
D350E Series II and D400E Series II Articulated Trucks Power Train Transmission Hydraulic Control
TK711, TK721, TK722 and TK732 Track Feller Bunchers Additional Messages
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0609 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0609 - FMI 05
TK711, TK721, TK722 and TK732 Track Feller Bunchers Safety Messages
Field Installation Of 3Z-5855 Jake Brake Modification {1119, 1129, 7314}
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Piston Pump (Hydraulic and Steering)
226 and 242 Skid Steer Loaders Power Train Chain (Drive) Tension - Adjust
R1600 Load Haul Dump Machine Electrical System Hydraulic Oil Temperature
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0610 - FMI 03
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Hydraulic Control
797 Off-Highway Truck Engine Supplement Engine Oil Cooler - Remove
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0610 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0610 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0611 - FMI 03
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0611 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0611 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0612 - FMI 03
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0612 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0612 - FMI 06