587R Pipelayer Power Train Transmission Hydraulic Control Valve - Remove Caterpillar


Transmission Hydraulic Control Valve - Remove
`
1.1. Removal Procedure

Removal Procedure

Start By:

  1. Remove the priority valve. Refer to Disassembly and Assembly, "Priority Valve - Remove".


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "AVSpare Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on AVSpare products.

Dispose of all fluids according to local regulations and mandates.





    Illustration 1g01388829

  1. Remove bolts (1). Position cable assembly (2) out of the way.

  1. Remove bolts (4). Position cable assembly (3) out of the way.



    Illustration 2g01388841

  1. Remove bolts (5). Use two people in order to remove transmission hydraulic control valve (6). The weight of transmission hydraulic control valve (6) is approximately 34 kg (75 lb).

Information System:

770 and 772 Off-Highway Truck/Tractors Metering Pump (Steering) - Remove and Install
0R-9393 Cylinder Pack Gp Piston Ring Position on Certain C16, 3406E, and 3456 Engines{1215, 1225}
584 and 584HD Forwarders Slope Operation
24M Motor Grader Hydraulic and Steering System Piston Pump (Implement and Steering)
16M Motor Grader Machine Systems Piston Pump (Hydraulic Fan) - Assemble
EquipmentManager User Guide Getting Started
16M Motor Grader Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Swing System
AccuGrade Laser (CB420) Determining Detected Faults (Electronic Service Tool)
AccuGrade Laser (CB420) Service Tools
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Travel System
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
24M Motor Grader Hydraulic and Steering System Pump Control Valve (Implement, Steering)
16M Motor Grader Power Train Wheel and Tire (Rear) - Remove and Install
16M Motor Grader Power Train Drive Chain - Install
AccuGrade Laser (CB420) Full Sensor - Calibrate
16M Motor Grader Power Train Drive Chain - Remove
AccuGrade Laser (CB420) Module - Flash Program
Problems with Bias Ply Tires on Specific Off-Highway Trucks{4203}
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Pilot Hydraulic System
R1600G Load Haul Dump Cooling System Coolant Additive (DEAC) - Add
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Pump Flow - Test
Cleaning the Compression Brake{1129}
216B2, 226B2, 232B2, 236B2, 242B2 and 252B2 Skid Steer Loaders Plate Locations and Film Locations