Service Brake (Wheel Spindle) - Install
`
16M Motor Grader Power Train
[KENR6019]
16M Motor Grader Power Train
Service Brake (Wheel Spindle) - Remove
16M Motor Grader Power Train
Housing (Tandem) - Remove and Install
BRAKING SYSTEM
BRAKE GP
16M Motor Grader Power Train
Service Brake (Wheel Spindle) - Disassemble
16M Motor Grader Power Train
Service Brake (Wheel Spindle) - Assemble
16M Motor Grader Power Train
Parking Brake - Remove
16M Motor Grader Power Train
Parking Brake - Install
16M Motor Grader Power Train
Service Brake (Wheel Spindle) - Remove
16M Motor Grader Power Train
Service Brake (Wheel Spindle) - Install
1.1. Installation Procedure
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7574     | Link Bracket     | 2     |
B     | 138-7576     | Link Bracket     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) , Tooling (B) , and a suitable lifting device in order to install wheel spindle (3) . The weight of wheel spindle (3) is approximately 322 kg (710 lb).
Show/hide table
![]() | |
Illustration 1 | g03740666 |
- Install bolts (4) . Tighten bolts (4) to a torque of 270 ± 40 N·m (199 ± 30 lb ft).
- Install tube assembly (2) .
Show/hide table
![]() | |
Illustration 2 | g01389668 |
- Install guard (1) .
Show/hide table
![]() | |
Illustration 3 | g01389664 |
End By:
- Install the drive chain. Refer to Disassembly and Assembly, "Drive Chain - Install".
- Install the rear wheels and tires. Refer to Disassembly and Assembly, "Wheel and Tire (Rear) - Remove and Install".
Information System:
16M Motor Grader Power Train
Service Brake (Wheel Spindle) - Remove
AP655D Asphalt Paver Machine Systems
Hydraulic Tank - Remove and Install
C4.4 and C6.6 Engines for Caterpillar Built Machines
Glossary
C4.4 and C6.6 Engines for Caterpillar Built Machines
System Overview
587R Pipelayer Power Train
Priority Valve - Assemble
587R Pipelayer Power Train
Priority Valve - Disassemble
EquipmentManager Dealer Administrator Manual
Product Link Installation
587R Pipelayer Power Train
Priority Valve - Install
24M Motor Grader Power Train Electronic Control System
MID 027 - CID 2734 - FMI 04
24M Motor Grader Power Train Electronic Control System
MID 027 - CID 2734 - FMI 03
Installation of Improved Walkways on 793C and 793C XQ Off-Highway Trucks{7254, 7255, 7256}
Procedure to Rework Felling Head Frame{6319}
AP655D and BG655D Asphalt Pavers Machine Systems
Steering Column - Disassemble
AP655D and BG655D Asphalt Pavers Machine Systems
Steering Column - Assemble
16M Motor Grader Power Train
Housing (Tandem) - Remove and Install
C4.4 and C6.6 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
16M Motor Grader Power Train
Rear Axle, Differential and Final Drive - Remove
16M Motor Grader Power Train
Rear Axle, Differential and Final Drive - Install
C4.4 and C6.6 Engines for Caterpillar Built Machines
Engine Wiring Information
AS3251C Asphalt Screed
Electronic Control Module (Screed)
Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332}
AS3251C Asphalt Screed
Operator Controls
2007/06/25
Correction to Operation and Maintenance Manual , "Hoist System and Brake System Oil Level - Check" {5056}
16M Motor Grader Power Train
Transmission Oil Filter Base - Remove