Steering Column - Disassemble
`
AP655D and BG655D Asphalt Pavers Machine Systems
[KENR6002]
AP655D and BG655D Asphalt Pavers Machine Systems
Steering Column - Install
AP655D and BG655D Asphalt Pavers Machine Systems
Steering Column - Assemble
OPERATOR STATION
CONTROL GP-STEERING
AP655D and BG655D Asphalt Pavers Machine Systems
Steering Wheel - Remove and Install
AP655D and BG655D Asphalt Pavers Machine Systems
Steering Column - Remove
AP655D and BG655D Asphalt Pavers Machine Systems
Steering Column - Install
AP655D and BG655D Asphalt Pavers Machine Systems
Steering Column - Disassemble
AP655D and BG655D Asphalt Pavers Machine Systems
Steering Column - Assemble
1.1. Disassembly Procedure
Start By:
- Remove the steering column. Refer to Disassembly and Assembly, "Steering Column - Remove".
- Remove bolts (2) and position sensor (1).
Show/hide table
Illustration 2 g01401479 - Remove bolts (3), tubes (3), and plate (5).
Show/hide table
Illustration 3 g01401480 - Remove roll pin (6).
Show/hide table
Illustration 4 g01401481 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Loosen set screws (8) and remove torque arm (7).
Show/hide table
Illustration 5 g01401482 - Remove woodruff key (12).
- Remove snap ring (11), spring (10), and spacer (9).
Show/hide table
Illustration 6 g01401483 - Remove roll pin (13) and shaft (14).
Show/hide table
Illustration 7 g01401484 - Remove bolts (16) and remove mounting block assembly (17) from plate (15).
Show/hide table
Illustration 8 g01401485 - Remove O-ring seal (18) from position sensor (1).
Show/hide table
![]() | |
Illustration 1 | g01401478 |
Information System:
16M Motor Grader Power Train
Service Brake (Wheel Spindle) - Install
16M Motor Grader Power Train
Service Brake (Wheel Spindle) - Remove
AP655D Asphalt Paver Machine Systems
Hydraulic Tank - Remove and Install
C4.4 and C6.6 Engines for Caterpillar Built Machines
Glossary
C4.4 and C6.6 Engines for Caterpillar Built Machines
System Overview
587R Pipelayer Power Train
Priority Valve - Assemble
587R Pipelayer Power Train
Priority Valve - Disassemble
EquipmentManager Dealer Administrator Manual
Product Link Installation
587R Pipelayer Power Train
Priority Valve - Install
24M Motor Grader Power Train Electronic Control System
MID 027 - CID 2734 - FMI 04
24M Motor Grader Power Train Electronic Control System
MID 027 - CID 2734 - FMI 03
Installation of Improved Walkways on 793C and 793C XQ Off-Highway Trucks{7254, 7255, 7256}
AP655D and BG655D Asphalt Pavers Machine Systems
Steering Column - Assemble
16M Motor Grader Power Train
Housing (Tandem) - Remove and Install
C4.4 and C6.6 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
16M Motor Grader Power Train
Rear Axle, Differential and Final Drive - Remove
16M Motor Grader Power Train
Rear Axle, Differential and Final Drive - Install
C4.4 and C6.6 Engines for Caterpillar Built Machines
Engine Wiring Information
AS3251C Asphalt Screed
Electronic Control Module (Screed)
Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332}
AS3251C Asphalt Screed
Operator Controls
2007/06/25
Correction to Operation and Maintenance Manual , "Hoist System and Brake System Oil Level - Check" {5056}
16M Motor Grader Power Train
Transmission Oil Filter Base - Remove
16M Motor Grader Power Train
Transmission Oil Filter Base - Install