Transmission and Bevel Gears - Install
`
587R Pipelayer Power Train
[RENR8246]
POWER TRAIN
GEAR GP
587R Pipelayer Power Train
Transmission and Bevel Gears - Separate
587R Pipelayer Power Train
Transmission and Bevel Gears - Connect
587R Pipelayer Power Train
Bevel and Transfer Gears - Disassemble
587R Pipelayer Power Train
Bevel and Transfer Gears - Assemble
587R Pipelayer Power Train
Transmission and Bevel Gears - Remove
587R Pipelayer Power Train
Transmission and Bevel Gears - Install
1.1. Installation Procedure
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | FT-1897 | Bracket As | 1 |
| 138-7575 | Link Bracket | 1 | |
| 8S-9089 | Bolt | 1 | |
| 1D-4719 | Full Nut | 1 | |
| B | 5J-0490 | Bolt | 1 |
| C | 4C-6486 | Stand | 1 |
| 8S-7611 | Tube | 1 | |
| 8S-8048 | Saddle | 1 | |
| 8S-7615 | Pin | 1 | |
| D | 138-7574 | Link Bracket | 2 |
| E | 1U-9200 | Lever Puller Hoist | 2 |
| 138-7575 | Link Bracket | 2 | |
- Attach Tooling (D) and a suitable lifting device onto transmission and bevel gear (12). The weight of transmission and bevel gear (12) is approximately 907 kg (2000 lb).
Show/hide table
 | |
| Illustration 1 | g01390602 |
- Position transmission and bevel gear (12) into the frame. Install Tooling (A). Place Tooling (A) onto Tooling (C) .
Show/hide table
 | |
| Illustration 2 | g01390607 |
- Remove Tooling (D) .
Show/hide table
| | |
| Illustration 3 | g01390602 |
- Attach a suitable lifting device onto Tooling (A) .
Show/hide table
 | |
| Illustration 4 | g01390234 |
- Attach Tooling (E) onto transmission and bevel gear (12) .
Show/hide table
 | |
| Illustration 5 | g01390719 |
- Lift Tooling (A) in order to remove Tooling (C). Use Tooling (E) in order to move transmission and bevel gear (12) into position.
- Install bolts (13) into transmission and bevel gear (12). Do not move bolts (14) .
Show/hide table
 | |
| Illustration 6 | g01390235 |
- Remove the suitable lifting device and Tooling (A) .
Show/hide table
| | |
| Illustration 7 | g01390234 |
- Install cover (11) .
Show/hide table
 | |
| Illustration 8 | g01390227 |
- Position cable assemblies (8) and (10). Install bolts (7) and (9) .
Show/hide table
 | |
| Illustration 9 | g01390213 |
- Install pin assemblies (5) and (6) .
Show/hide table
 | |
| Illustration 10 | g01390209 |
- Install cover (4) .
Show/hide table
 | |
| Illustration 11 | g01390206 |
- Install plate (3). Install bolts (2). Install yoke (1) .
Show/hide table
 | |
| Illustration 12 | g01390205 |
Information System:
587R Pipelayer Power Train
Transmission and Bevel Gears - Remove
C15 and C18 Generator Set Engines
Fan Guard - Remove and Install
16M Motor Grader Power Train
Transmission Oil Cooler - Install
16M Motor Grader Power Train
Transmission Oil Cooler - Remove
24M Motor Grader Power Train Electronic Control System
MID 027 - CID 1639 - FMI 09
AS3251C Asphalt Screed
Screed Components
16M Motor Grader Power Train
Transmission Oil Filter Base - Install
16M Motor Grader Power Train
Transmission Oil Filter Base - Remove
2007/06/25
Correction to Operation and Maintenance Manual , "Hoist System and Brake System Oil Level - Check" {5056}
AS3251C Asphalt Screed
Operator Controls
Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332}
AS3251C Asphalt Screed
Electronic Control Module (Screed)
AS4251C Asphalt Paver
Specifications
C15 and C18 Generator Set Engines
Fan - Remove and Install
AS3251C Asphalt Screed
Screed Control System
AP655D and BG655D Asphalt Pavers Propel System
Piston Pump Flow - Test - Steel Track
EquipmentManager Dealer Administrator Manual
Setup Subscriptions
773F and 775F Off-Highway Truck
Radio Mount
AccuGrade Laser (CB420)
AS 1 Memory Fault
Replacement of the Cover Assembly on the Cab Door{7308}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
16M Motor Grader Power Train
Transmission - Disassemble
16M Motor Grader Power Train
Transmission - Assemble
3176C, 3406E and 3456 Industrial Engines
Electronic Service Tools