Final Drive Planetary (Drum Propel) - Disassemble
`
CB14 Paving Compactor Machine Systems
[KENR6008]
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Remove
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Assemble
POWER TRAIN
GEARBOX GP
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Remove
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Disassemble
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Assemble
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Install
1.1. Disassembly Procedure
Disassembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tools     | Part Number     | Part Description     | Qty     |
A     | 8T-4200     | Bolts     | 2     |
B     | 8T-4222     | Plated Washer     | 2     |
C     | 1P-1853     | Retaining Ring Pliers     | 1     |
D     | 1P-1859     | Retaining Ring Pliers     | 1     |
E     | 4C-3082     | Two Jaw Puller     | 1     |
F     | 5P-5197     | Retaining Ring Pliers As     | 1     |
G     | 4C-3085     | Two Jaw Puller     | 1     |
H     | 1P-0510     | Driver Gp     | 1     |
J     | 314-9075     | Bearing Puller     | 1     |
K     | 1P-1861     | Retaining Ring Pliers     | 1     |
L     | 1P-0520     | Driver Gp     | 1     |
Start By:
- Remove the final drive planetary (drum propel). Refer to Disassembly and Assembly, "Final Drive Planetary (Drum Propel) - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Remove O-ring seal (1) from the brake port on flanged hub (2) .
Show/hide table
![]() | |
Illustration 1 | g01390786 |
- Mark the position of springs (3) as a reference for the assembly procedure. Remove springs (3) .
Show/hide table
![]() | |
Illustration 2 | g01390787 |
- Install Tooling (A) and Tooling (B) to flanged hub (2) .
Show/hide table
![]() | |
Illustration 3 | g01390788 |
- Insert compressed air into the brake port. Brake piston (4) will rise to the top. Remove Tooling (A) and Tooling (B) .
Show/hide table
![]() | |
Illustration 4 | g01390791 |
- Remove brake piston (4) .
Show/hide table
![]() | |
Illustration 5 | g01390815 |
- Remove O-ring seal (5) and backup ring (6) from flanged hub (2) .
Show/hide table
![]() | |
Illustration 6 | g01390816 |
- Remove brake shaft (7) .
Show/hide table
![]() | |
Illustration 7 | g01390817 |
- Use Tooling (C) in order to remove retaining ring (8) from brake shaft (7) .
Show/hide table
![]() | |
Illustration 8 | g01390818 |
- Remove brake disc assembly (9) .
Show/hide table
![]() | |
Illustration 9 | g01390819 |
- Remove gear (10) .
Show/hide table
![]() | |
Illustration 10 | g01390821 |
- Turn the gearbox upside-down and remove retaining ring (11) .
Show/hide table
![]() | |
Illustration 11 | g01390822 |
- Remove plug (12) and end cover (13) .
Show/hide table
![]() | |
Illustration 12 | g01390823 |
- Remove O-ring seal (14) from gearbox housing (15) .
Show/hide table
![]() | |
Illustration 13 | g01390824 |
- Use Tooling (D) in order to remove retaining rings (16) from gears (17) .
Show/hide table
![]() | |
Illustration 14 | g01390825 |
- Use Tooling (E) in order to remove gears (17) .
Show/hide table
![]() | |
Illustration 15 | g01390829 |
- Use Tooling (F) in order to remove retaining ring (18) from flanged hub (2) .
Show/hide table
![]() | |
Illustration 16 | g01390830 |
- Use Tooling (G) and Tooling (H) in order to remove flanged hub (2) from gearbox housing (15) .
Show/hide table
![]() | |
Illustration 17 | g01390831 |
- Attach Tooling (J) to bearing (19) .
Show/hide table
![]() | |
Illustration 18 | g01390832 |
- Use Tooling (G), Tooling (H), and Tooling (J) in order to remove bearing (19) from flanged hub (2) .
Show/hide table
![]() | |
Illustration 19 | g01390833 |
- Remove half seal (20) from flanged hub (2) .
Show/hide table
![]() | |
Illustration 20 | g01390835 |
- Remove O-ring seal (21) from gearbox housing (15) .
Show/hide table
![]() | |
Illustration 21 | g01390840 |
- Use Tooling (K) in order to remove retaining ring (22) from gearbox housing (15) .
Show/hide table
![]() | |
Illustration 22 | g01390842 |
- Use Tooling (G) and Tooling (L) in order to remove spacer (23) and bearing (24) from gearbox housing (15) .
Show/hide table
![]() | |
Illustration 23 | g01390848 |
Information System:
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Remove
Fluid Power and Electrical Graphic Symbols
Electrical Power Graphic Symbols
Inspection of Rim Assemblies of Off-Highway Trucks {4201, 4209}
CB14 Paving Compactor Machine Systems
Drum - Install
AS4251C Asphalt Paver
Operator Controls
AS4251C Asphalt Paver
Operator Controls - Main Control Panel
AS4251C Asphalt Paver
Operator Controls - Right Control Panel
AS4251C Asphalt Paver
Operator Controls - Left Control Panel
AP655D and BG655D Asphalt Pavers Propel System
Piston Pump Neutral - Test and Adjust - Right Propel Pump (Steel Track)
CB14 Paving Compactor Machine Systems
Drum - Remove
3176C, 3406E and 3456 Industrial Engines
Electronic Service Tools
16M Motor Grader Power Train
Transmission - Assemble
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Assemble
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Install
EquipmentManager Dealer Administrator Manual
Manage Equipment Groups
R2900G Load Haul Dump
Lifting and Tying Down the Machine
C4.4 (Mech) Industrial Engine
Engine Valve Lash - Inspect/Adjust
AP655D and BG655D Asphalt Pavers Propel System
Piston Pump Neutral - Test and Adjust - Left Propel Pump (Steel Track)
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Track (Rubber) - Remove and Install
AP655D and BG655D Asphalt Pavers Propel System
Relief Valve (Charge) - Test and Adjust - Right Pump (Steel Track)
AP655D and BG655D Asphalt Pavers Propel System
Pump Synchronization - Test and Adjust - Steel Track
C15 and C18 Generator Set Engines
Fuel Cooler - Remove and Install
24M Motor Grader Power Train Electronic Control System
MID 027 - CID 0679 - FMI 03
C15 and C18 Generator Set Engines
Expansion Tank - Remove and Install