CB14 Paving Compactor Machine Systems Final Drive Planetary (Drum Propel) - Install Caterpillar


Final Drive Planetary (Drum Propel) - Install
`
1.1. Installation Procedure

Installation Procedure

Table 1
Required Tools    
Tools     Part Number     Part Description     Qty    
A     6V-2082     Lifting Hook     1    
B     4C-4030     Thread Lock Compound     1    



    Illustration 1g01390765

    ------ WARNING! ------

    Personal injury can result from being struck by parts propelled by a released spring force.

    Make sure to wear all necessary protective equipment.

    Follow the recommended procedure and use all recommended tooling to release the spring force.

    ----------------------

  1. Install gerotor motor (15) to final drive planetary (13). Install bolts (14) .



    Illustration 2g01390713

  1. Install final drive planetary (13) to plate (11) .

  1. Install bolts (12) .



    Illustration 3g01390712

  1. Attach Tooling (A) and a suitable lifting device to motor assembly (10). Install motor assembly (10) and bolts (9). Apply Tooling (B) to bolts (9). Tighten bolts (9) to a torque of 200 ± 40 N·m (148 ± 30 lb ft).



    Illustration 4g01390711

  1. Attach a suitable lifting device to drum support (6). Install the shims, drum support (6), bolts (8), and bolts (7) .

  1. Raise the right side of the machine in order to remove the suitable blocks.



    Illustration 5g01390710

  1. Connect hose assemblies (3), (2), (5), and (4) to propel motor (1) .

Information System:

CB14 Paving Compactor Machine Systems Final Drive Planetary (Drum Propel) - Assemble
CB14 Paving Compactor Machine Systems Final Drive Planetary (Drum Propel) - Disassemble
CB14 Paving Compactor Machine Systems Final Drive Planetary (Drum Propel) - Remove
Fluid Power and Electrical Graphic Symbols Electrical Power Graphic Symbols
Inspection of Rim Assemblies of Off-Highway Trucks {4201, 4209}
CB14 Paving Compactor Machine Systems Drum - Install
AS4251C Asphalt Paver Operator Controls
AS4251C Asphalt Paver Operator Controls - Main Control Panel
AS4251C Asphalt Paver Operator Controls - Right Control Panel
AS4251C Asphalt Paver Operator Controls - Left Control Panel
AP655D and BG655D Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Right Propel Pump (Steel Track)
CB14 Paving Compactor Machine Systems Drum - Remove
EquipmentManager Dealer Administrator Manual Manage Equipment Groups
R2900G Load Haul Dump Lifting and Tying Down the Machine
C4.4 (Mech) Industrial Engine Engine Valve Lash - Inspect/Adjust
AP655D and BG655D Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Left Propel Pump (Steel Track)
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track (Rubber) - Remove and Install
AP655D and BG655D Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust - Right Pump (Steel Track)
AP655D and BG655D Asphalt Pavers Propel System Pump Synchronization - Test and Adjust - Steel Track
C15 and C18 Generator Set Engines Fuel Cooler - Remove and Install
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0679 - FMI 03
C15 and C18 Generator Set Engines Expansion Tank - Remove and Install
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0679 - FMI 05
587R Pipelayer Machine Systems Fuel Tank - Remove and Install