Platform - Remove
`
587R Pipelayer Machine Systems
[RENR8212]
587R Pipelayer Machine Systems
Fuel Tank - Remove and Install
587R Pipelayer Machine Systems
Platform - Install
OPERATOR STATION
PLATFORM GP
587R Pipelayer Machine Systems
Platform - Remove
587R Pipelayer Machine Systems
Platform - Install
1.1. Removal Procedure
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | FT-1115     | Vacuum Cap     | 1     |
9S-8008 | Plug     | 1     | |
3D-3824 | Angle     | 1     | |
B     | 138-7575     | Link Bracket     | 2     |
138-7573 | Link Bracket     | 2     | |
C     | 1U-9200     | Lever Puller Hoist     | 2     |
Start By:
- Remove the seat. Refer to Disassembly and Assembly, "Seat - Remove".
- Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "AVSpare Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on AVSpare products. Dispose of all fluids according to local regulations and mandates. |
- Move the battery disconnect switch to the OFF position.
- Remove guard (1) .
Show/hide table
![]() | |
Illustration 1 | g01391437 |
- Attach Tooling (A) onto hydraulic tank (2). Attach an air supply hose onto Tooling (A). Apply 276 kPa (40 psi) to 414 kPa (60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Show/hide table
![]() | |
Illustration 2 | g01367688 |
- Remove floor panel (3) .
Show/hide table
![]() | |
Illustration 3 | g01391455 |
- Remove armrest (4). Remove floor panel (5) .
Show/hide table
![]() | |
Illustration 4 | g01391456 |
- Remove bolts (6), (7), (8), and (9). These bolts secure the linkage arms.
Show/hide table
![]() | |
Illustration 5 | g01391457 |
- Remove lever assembly (10) .
Show/hide table
![]() | |
Illustration 6 | g01391484 |
- Remove bolt (11) in order to disconnect the linkage.
Show/hide table
![]() | |
Illustration 7 | g01391485 |
- Remove access panel (12) .
Show/hide table
![]() | |
Illustration 8 | g01391487 |
- Disconnect hose assemblies (13), (14), (15), and (16) .
Show/hide table
![]() | |
Illustration 9 | g01391488 |
- Disconnect the hose assemblies to valve (17) .
Show/hide table
![]() | |
Illustration 10 | g01391507 |
- Remove bracket assembly (18) .
Show/hide table
![]() | |
Illustration 11 | g01391510 |
- Remove bolt (19) .
Show/hide table
![]() | |
Illustration 12 | g01391511 |
- Remove cover plate (20) .
Show/hide table
![]() | |
Illustration 13 | g01391605 |
- Remove pins (21) and (22) .
Show/hide table
![]() | |
Illustration 14 | g01391606 |
- Remove plates (23) and (24) in order to remove the cables from the transmission housing.
Show/hide table
![]() | |
Illustration 15 | g01391607 |
- Remove the cable straps. Disconnect harness assembly (25) .
Show/hide table
![]() | |
Illustration 16 | g01391610 |
- Remove bolt (26) in order to disconnect the shift linkage.
Show/hide table
![]() | |
Illustration 17 | g01391669 |
- Disconnect harness assembly (27). Disconnect wire assembly (28) .
Show/hide table
![]() | |
Illustration 18 | g01391726 |
- Remove cover (29) .
Show/hide table
![]() | |
Illustration 19 | g01391730 |
- Remove mounting bolts (30) .
Show/hide table
![]() | |
Illustration 20 | g01391731 |
- Attach Tooling (B) onto platform (31) .
Show/hide table
![]() | |
Illustration 21 | g01391732 |
- Attach Tooling (C) and a suitable lifting device onto platform (31). Remove platform (31). The weight of platform (31) is approximately 340 kg (750 lb).
Show/hide table
![]() | |
Illustration 22 | g01391736 |
Information System:
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Track Tensioner - Remove and Install
770 and 772 Off-Highway Truck/Tractors
Seat - Remove and Install
2007/06/25
Recoil Seal Guard Prevents Leaks {4151}
AP655D and BG655D Asphalt Pavers Propel System
Pressure Limiter Valve - Test and Adjust - Right Propel Pump (Steel Track)
3412E Engine for Caterpillar Built Machines
Event Code List
AP655D and BG655D Asphalt Pavers Propel System
Speed Sensor (Propel Motor) - Adjust - Steel Track Machine
C4.4 and C6.6 Engines for Caterpillar Built Machines
Indicator Lamps
R1700G Load Haul Dump
Lifting and Tying Down the Machine
R2900G Load Haul Dump
Engine Starting with Auxiliary Start Receptacle
R2900G Load Haul Dump
Additional Messages
R2900G Load Haul Dump
Safety Messages
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems
Reversing Fan - Test
587R Pipelayer Machine Systems
Platform - Install
770 and 772 Off-Highway Truck/Tractors
Heater Coil - Remove and Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Idler Axle - Remove
3412E Engine for Caterpillar Built Machines
Coolant Temperature Is High
False Warning for Low Transmission Oil Level on Some Off-Highway Trucks{3101, 7422}
AP655D and BG655D Asphalt Pavers Propel System
Pressure Limiter Valve - Test and Adjust - Left Propel Pump (Steel Track)
R2900G Load Haul Dump
Caterpillar Monitoring System
R1700G Load Haul Dump
Safety Messages
C4.4 and C6.6 Engines for Caterpillar Built Machines
Multiposition Switch Setup
C4.4 Industrial Engine
Fuel Related Components in Cold Weather
C4.4 and C6.6 Engines for Caterpillar Built Machines
Customer Specified Parameters
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines
Governor - Adjust