Platform - Install
`
587R Pipelayer Machine Systems
[RENR8212]
587R Pipelayer Machine Systems
Platform - Remove
587R Pipelayer Machine Systems
Hydraulic Tank and Filter - Remove
OPERATOR STATION
PLATFORM GP
587R Pipelayer Machine Systems
Platform - Remove
587R Pipelayer Machine Systems
Platform - Install
1.1. Installation Procedure
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | FT-1115 | Vacuum Cap | 1 |
| 9S-8008 | Plug | 1 | |
| 3D-3824 | Angle | 1 | |
| B | 138-7575 | Link Bracket | 2 |
| 138-7573 | Link Bracket | 2 | |
| C | 1U-9200 | Lever Puller Hoist | 2 |
- Attach Tooling (B) onto platform (31) .
Show/hide table
 | |
| Illustration 1 | g01391732 |
- Attach Tooling (C) and a suitable lifting device onto platform (31). Install platform (31). The weight of platform (31) is approximately 340 kg (750 lb).
Show/hide table
 | |
| Illustration 2 | g01391736 |
- Install mounting bolts (30) .
Show/hide table
 | |
| Illustration 3 | g01391731 |
- Install cover (29) .
Show/hide table
 | |
| Illustration 4 | g01391730 |
- Connect harness assembly (28). Connect harness assembly (27).
Show/hide table
 | |
| Illustration 5 | g01391726 |
- Connect the shift linkage. Install bolt (26) .
Show/hide table
 | |
| Illustration 6 | g01391669 |
- Connect harness assembly (25). Install the cable straps.
Show/hide table
 | |
| Illustration 7 | g01391610 |
- Install the cables into the transmission housing. Install plates (23) and (24).
Show/hide table
 | |
| Illustration 8 | g01391607 |
- Install pins (21) and (22) .
Show/hide table
 | |
| Illustration 9 | g01391606 |
- Install cover plate (20) .
Show/hide table
 | |
| Illustration 10 | g01391605 |
- Install bolt (19) .
Show/hide table
 | |
| Illustration 11 | g01391511 |
- Install bracket assembly (18) .
Show/hide table
 | |
| Illustration 12 | g01391510 |
- Disconnect the hose assemblies to valve (17) .
Show/hide table
 | |
| Illustration 13 | g01391507 |
- Connect hose assemblies (13), (14), (15), and (16) .
Show/hide table
 | |
| Illustration 14 | g01391488 |
- Install access panel (12) .
Show/hide table
 | |
| Illustration 15 | g01391487 |
- Connect the linkage. Install bolt (11) .
Show/hide table
 | |
| Illustration 16 | g01391485 |
- Install lever assembly (10) .
Show/hide table
 | |
| Illustration 17 | g01391484 |
- Install bolts (6), (7), (8), and (9). These bolts secure the linkage arms.
Show/hide table
 | |
| Illustration 18 | g01391457 |
- Install armrest (4). Install floor panel (5) .
Show/hide table
 | |
| Illustration 19 | g01391456 |
- Install floor panel (3) .
Show/hide table
 | |
| Illustration 20 | g01391455 |
- Remove Tooling (A) from hydraulic tank (2) .
Show/hide table
 | |
| Illustration 21 | g01367688 |
- Install guard (1) .
Show/hide table
 | |
| Illustration 22 | g01391437 |
- Move the battery disconnect switch to the ON position.
End By: Install the seat. Refer to Disassembly and Assembly, "Seat - Install".
Information System:
587R Pipelayer Machine Systems
Platform - Remove
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Track Tensioner - Remove and Install
770 and 772 Off-Highway Truck/Tractors
Seat - Remove and Install
2007/06/25
Recoil Seal Guard Prevents Leaks {4151}
AP655D and BG655D Asphalt Pavers Propel System
Pressure Limiter Valve - Test and Adjust - Right Propel Pump (Steel Track)
3412E Engine for Caterpillar Built Machines
Event Code List
AP655D and BG655D Asphalt Pavers Propel System
Speed Sensor (Propel Motor) - Adjust - Steel Track Machine
C4.4 and C6.6 Engines for Caterpillar Built Machines
Indicator Lamps
R1700G Load Haul Dump
Lifting and Tying Down the Machine
R2900G Load Haul Dump
Engine Starting with Auxiliary Start Receptacle
R2900G Load Haul Dump
Additional Messages
R2900G Load Haul Dump
Safety Messages
770 and 772 Off-Highway Truck/Tractors
Heater Coil - Remove and Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Idler Axle - Remove
3412E Engine for Caterpillar Built Machines
Coolant Temperature Is High
False Warning for Low Transmission Oil Level on Some Off-Highway Trucks{3101, 7422}
AP655D and BG655D Asphalt Pavers Propel System
Pressure Limiter Valve - Test and Adjust - Left Propel Pump (Steel Track)
R2900G Load Haul Dump
Caterpillar Monitoring System
R1700G Load Haul Dump
Safety Messages
C4.4 and C6.6 Engines for Caterpillar Built Machines
Multiposition Switch Setup
C4.4 Industrial Engine
Fuel Related Components in Cold Weather
C4.4 and C6.6 Engines for Caterpillar Built Machines
Customer Specified Parameters
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines
Governor - Adjust
C4.4 and C6.6 Engines for Caterpillar Built Machines
Customer Specified Parameters Table