Heater Coil - Remove and Install
`
770 and 772 Off-Highway Truck/Tractors
[RENR8273]
770 and 772 Off-Highway Truck/Tractors
Seat - Remove and Install
770 and 772 Off-Highway Truck/Tractors
Steering Link - Remove and Install
OPERATOR STATION
AIR CONDITIONER GP
770 and 772 Off-Highway Truck/Tractors
Heater Coil - Remove and Install
770 and 772 Off-Highway Truck/Tractors
Evaporator Coil - Remove and Install
770 and 772 Off-Highway Truck/Tractors
Blower Motor - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Start By:
- Remove the evaporator coil. Refer to Disassembly and Assembly, "Evaporator Coil - Remove and Install".
- Disconnect harness assembly (4). Remove screws (2). Remove bolt (1) and bolts (3). Remove valve assembly (5).
Show/hide table
Illustration 2 g01391410 - Remove screws (7) and remove actuator (8). Remove bushing (6).
Show/hide table
Illustration 3 g01391433 - Remove screws (9). Remove plate (10) from valve assembly (11).
Show/hide table
Illustration 4 g01391443 - Remove bolts (12). Remove heater coil (13).
Show/hide table
![]() | |
Illustration 1 | g01391374 |
- Position heater coil (13) and install bolts (12).
Show/hide table
Illustration 6 g01391433 - Position plate (10) onto valve assembly (11). Install screws (9).
Show/hide table
Illustration 7 g01391410 - Install bushing (6) and position actuator (8). Install screws (7).
Show/hide table
Illustration 8 g01391374 - Position valve assembly (5) and install bolts (3) and bolt (1). Install screws (2). Connect harness assembly (4).
Show/hide table
![]() | |
Illustration 5 | g01391443 |
End By:
- Install the evaporator coil. Refer to Disassembly and Assembly, "Evaporator Coil - Remove and Install".
Information System:
587R Pipelayer Machine Systems
Platform - Install
587R Pipelayer Machine Systems
Platform - Remove
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Track Tensioner - Remove and Install
770 and 772 Off-Highway Truck/Tractors
Seat - Remove and Install
2007/06/25
Recoil Seal Guard Prevents Leaks {4151}
AP655D and BG655D Asphalt Pavers Propel System
Pressure Limiter Valve - Test and Adjust - Right Propel Pump (Steel Track)
3412E Engine for Caterpillar Built Machines
Event Code List
AP655D and BG655D Asphalt Pavers Propel System
Speed Sensor (Propel Motor) - Adjust - Steel Track Machine
C4.4 and C6.6 Engines for Caterpillar Built Machines
Indicator Lamps
R1700G Load Haul Dump
Lifting and Tying Down the Machine
R2900G Load Haul Dump
Engine Starting with Auxiliary Start Receptacle
R2900G Load Haul Dump
Additional Messages
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Idler Axle - Remove
3412E Engine for Caterpillar Built Machines
Coolant Temperature Is High
False Warning for Low Transmission Oil Level on Some Off-Highway Trucks{3101, 7422}
AP655D and BG655D Asphalt Pavers Propel System
Pressure Limiter Valve - Test and Adjust - Left Propel Pump (Steel Track)
R2900G Load Haul Dump
Caterpillar Monitoring System
R1700G Load Haul Dump
Safety Messages
C4.4 and C6.6 Engines for Caterpillar Built Machines
Multiposition Switch Setup
C4.4 Industrial Engine
Fuel Related Components in Cold Weather
C4.4 and C6.6 Engines for Caterpillar Built Machines
Customer Specified Parameters
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines
Governor - Adjust
C4.4 and C6.6 Engines for Caterpillar Built Machines
Customer Specified Parameters Table
C4.4 and C6.6 Engines for Caterpillar Built Machines
Can Not Reach Top Engine RPM