Idler Axle - Remove
`
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
[UENR0251]
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Track Tensioner - Remove and Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Track Drive - Remove
UNDERCARRIAGE
WHEEL & IDLER GP
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Idler Axle - Remove
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Idler Axle - Disassemble
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Idler Axle - Assemble
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Idler Axle - Install
1.1. Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-1861 | Retaining Ring Pliers | 1 |
Start By:
- Remove the front idler wheels. Refer to Disassembly and Assembly, "Idler Wheel - Remove and Install".
- Remove retaining ring (1) and remove dust cap (2). Repeat for the other side.
Show/hide table
Illustration 2 g01391407 - Remove locknut (3) and discard the locknut.
- Remove washer (4).
- Remove hub assembly (5).
- Remove idler axle (7) and remove hub assembly (6).
Show/hide table
| |
| Illustration 1 | g01391392 |
Show/hide table
| NOTICE |
|---|
|
Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. |
Information System:
770 and 772 Off-Highway Truck/Tractors
Heater Coil - Remove and Install
587R Pipelayer Machine Systems
Platform - Install
587R Pipelayer Machine Systems
Platform - Remove
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Track Tensioner - Remove and Install
770 and 772 Off-Highway Truck/Tractors
Seat - Remove and Install
2007/06/25
Recoil Seal Guard Prevents Leaks {4151}
AP655D and BG655D Asphalt Pavers Propel System
Pressure Limiter Valve - Test and Adjust - Right Propel Pump (Steel Track)
3412E Engine for Caterpillar Built Machines
Event Code List
AP655D and BG655D Asphalt Pavers Propel System
Speed Sensor (Propel Motor) - Adjust - Steel Track Machine
C4.4 and C6.6 Engines for Caterpillar Built Machines
Indicator Lamps
R1700G Load Haul Dump
Lifting and Tying Down the Machine
R2900G Load Haul Dump
Engine Starting with Auxiliary Start Receptacle
3412E Engine for Caterpillar Built Machines
Coolant Temperature Is High
False Warning for Low Transmission Oil Level on Some Off-Highway Trucks{3101, 7422}
AP655D and BG655D Asphalt Pavers Propel System
Pressure Limiter Valve - Test and Adjust - Left Propel Pump (Steel Track)
R2900G Load Haul Dump
Caterpillar Monitoring System
R1700G Load Haul Dump
Safety Messages
C4.4 and C6.6 Engines for Caterpillar Built Machines
Multiposition Switch Setup
C4.4 Industrial Engine
Fuel Related Components in Cold Weather
C4.4 and C6.6 Engines for Caterpillar Built Machines
Customer Specified Parameters
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines
Governor - Adjust
C4.4 and C6.6 Engines for Caterpillar Built Machines
Customer Specified Parameters Table
C4.4 and C6.6 Engines for Caterpillar Built Machines
Can Not Reach Top Engine RPM
3412E Engine for Caterpillar Built Machines
Engine Misfires, Runs Rough or Is Unstable