EPC Parts Catalogs

587R Pipelayer Machine Systems Hydraulic Tank and Filter - Install Caterpillar


  1. Home
  2. Disassembly and Assembly
  3. #128561
Hydraulic Tank and Filter - Install
`
587R Pipelayer Machine Systems [RENR8212]
587R Pipelayer Machine Systems Hydraulic Tank and Filter - Remove
587R Pipelayer Machine Systems Accumulator - Remove and Install
HYDRAULIC SYSTEM
FILTER GP
587R Pipelayer Machine Systems Hydraulic Tank and Filter - Disassemble
587R Pipelayer Machine Systems Hydraulic Tank and Filter - Assemble
587R Pipelayer Machine Systems Hydraulic Tank and Filter - Remove
587R Pipelayer Machine Systems Hydraulic Tank and Filter - Install
1.1. Installation Procedure

Installation Procedure

    Show/hide table

    Illustration 1g01391965

  1. Attach a suitable lifting device onto hydraulic tank and filter (9). The weight of hydraulic tank (9) is approximately 168 kg (370 lb).

  1. Position Hydraulic tank and filter (9) .
    Show/hide table

    Illustration 2g01391968

  1. Install bolt (10) .

  1. Repeat Step 3 for the opposite side.
    Show/hide table

    Illustration 3g01391963

  1. Position manifold (8). Install bolts (7) .
    Show/hide table

    Illustration 4g01391961

  1. Install bolts (6). Connect harness assemblies (5). Install cable strap (4).
    Show/hide table

    Illustration 5g01391960

  1. Position manifold (1). Install bolts (3) .

  1. Connect hose assembly (2) .

  1. Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic Oil - Change".

End By: Install the hood and the dust ejector. Refer to Disassembly and Assembly, "Hood and dust ejector - Remove and Install".

Information System:

587R Pipelayer Machine Systems Hydraulic Tank and Filter - Remove
C15 and C18 Generator Set Engines Radiator Top Tank - Remove and Install - Jacket Water Heater
C15 and C18 Generator Set Engines Radiator Bottom Tank - Remove and Install - Jacket Water Heater
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Pilot Valve
EquipmentManager User Guide Asset Watch
EquipmentManager Dealer Administrator Manual Preferences
3408E and 3412E Engines for Caterpillar Built Machines Engine Overspeeds on Start-up
EquipmentManager Dealer Administrator Manual Manage Planned Maintenance
EquipmentManager Dealer Administrator Manual Upload Data
EquipmentManager Dealer Administrator Manual Manage Event Tracking
3412E Engine for Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
C4.4 and C6.6 Engines for Caterpillar Built Machines Can Not Reach Top Engine RPM
2007/07/16 Improved Belts are now Used {1357, 1397, 1405, 7320}
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Head
3412E Engine for Caterpillar Built Machines Engine Shutdown Is Intermittent
3412E Engine for Caterpillar Built Machines Engine Top Speed Is Not Obtained
C4.4 and C6.6 Engines for Caterpillar Built Machines Coolant Temperature Is Too High
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
C4.4 and C6.6 Engines for Caterpillar Built Machines Excessive Fuel Consumption
C4.4 and C6.6 Engines for Caterpillar Built Machines Intake Air Temperature Is Too High
Installation of Fuel Lines{1274}
770 and 772 Off-Highway Truck/Tractors Steering Link - Remove and Install
C15 and C18 Generator Set Engines Radiator Core - Remove and Install - Jacket Water Heater
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track Drive - Remove