Track Drive - Remove
`
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
[UENR0251]
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Idler Axle - Remove
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Track Drive - Install
UNDERCARRIAGE
DRIVE GP
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Track Drive - Remove
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Track Drive - Install
1.1. Removal Procedure
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 169-6969 | Metric Stud | 2 |
- Release the track tension. Refer to Operation and Maintenance Manual, "Track (Rubber) - Inspect/Adjust".
Show/hide table
Illustration 1 g01392041 - Attach a suitable lifting device to track (1). The weight of track (1) is approximately
86 kg (190 lb) . Raise track (1) in order to clear track drive (2).Show/hide tableIllustration 2 g01336897 Typical Example - Remove two bolts (3) that are 180° from each other.
- Install Tooling (A).
- Remove the remaining bolts (3) from track drive (2).
Show/hide table
Illustration 3 g01336975 Typical Example - Slide track drive (2) on Tooling (A).
- Remove the suitable lifting device from track (1) and attach the suitable lifting device to track drive (2). The weight of track drive (2) is approximately
29 kg (64 lb) . - Remove track drive (2) from the machine.
Information System:
C15 and C18 Generator Set Engines
Radiator Core - Remove and Install - Jacket Water Heater
770 and 772 Off-Highway Truck/Tractors
Steering Link - Remove and Install
Installation of Fuel Lines{1274}
C4.4 and C6.6 Engines for Caterpillar Built Machines
Intake Air Temperature Is Too High
C4.4 and C6.6 Engines for Caterpillar Built Machines
Excessive Fuel Consumption
C4.4 and C6.6 Engines for Caterpillar Built Machines
Engine Misfires, Runs Rough or Is Unstable
C4.4 and C6.6 Engines for Caterpillar Built Machines
Coolant Temperature Is Too High
3412E Engine for Caterpillar Built Machines
Engine Top Speed Is Not Obtained
3412E Engine for Caterpillar Built Machines
Engine Shutdown Is Intermittent
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head
2007/07/16
Improved Belts are now Used {1357, 1397, 1405, 7320}
587R Pipelayer Machine Systems
Hydraulic Tank and Filter - Install
3412E Engine for Caterpillar Built Machines
Oil Pressure Is Low
24M Motor Grader Power Train Electronic Control System
MID 027 - CID 0679 - FMI 06
24M Motor Grader Power Train
Transmission
C6.6 Engines for Caterpillar Built Machines
Fuel Filter Base - Remove and Install - Secondary Fuel Filter
C6.6 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove
C6.6 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Install
C6.6 Engines for Caterpillar Built Machines
Fuel Manifold (Rail) - Remove and Install
C6.6 Engines for Caterpillar Built Machines
Fuel Injection Lines - Remove
C6.6 Engines for Caterpillar Built Machines
Fuel Injection Lines - Install
C6.6 Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove
C6.6 Engines for Caterpillar Built Machines
Fuel Injection Pump - Install
C6.6 Engines for Caterpillar Built Machines
Fuel Injection Pump Gear - Remove