259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track Drive - Install Caterpillar

Installation Procedure

Show/hide table

Illustration 1	g01336975
Typical Example

1. Install Tooling (A) onto the piston motor at 180° from each other.

2. Attach a suitable lifting device to track drive (2). The weight of track drive (2) is approximately 29 kg (64 lb). Use the suitable lifting device in order to position track drive (2) onto Tooling (A).

3. Remove the suitable lifting device from track drive (2) and attach the suitable lifting device to track (1). The weight of track (1) is approximately 86 kg (190 lb). Raise track (1) in order to clear track drive (2).

4. Slide track drive (2) into position on Tooling (A).
   Show/hide table

   Illustration 2	g01336897
   Typical Example

5. Install bolts (3) to track drive (2). Do not tighten bolts (3) at this time.

6. Remove Tooling (A) from track drive (2) and install the remaining two bolts (3) to track drive (2).

7. Tighten bolts (3) in a cross pattern to a torque of 270 ± 40 N·m (200 ± 30 lb ft).

8. Remove the suitable lifting device and adjust the track tension. Refer to Operation and Maintenance Manual, "Track (Rubber) - Inspect/Adjust".