Boom Winch Motor - Install
`
587R Pipelayer Machine Systems
[RENR8212]
587R Pipelayer Machine Systems
Boom Winch Motor - Remove
587R Pipelayer Machine Systems
Boom Winch, Hook Winch and Winch Frame - Remove
WORK TOOLS
WINCH GP
587R Pipelayer Machine Systems
Boom Winch Motor - Disassemble
587R Pipelayer Machine Systems
Boom Winch Motor - Assemble
587R Pipelayer Machine Systems
Hook Winch Motor - Disassemble
587R Pipelayer Machine Systems
Hook Winch Motor - Assemble
587R Pipelayer Machine Systems
Boom Winch - Disassemble
587R Pipelayer Machine Systems
Boom Winch - Assemble
587R Pipelayer Machine Systems
Hook Winch - Disassemble
1.1. Installation Procedure
Installation Procedure
- Attach a suitable lifting device onto boom winch motor (14). Install boom winch motor (14). The weight of boom winch motor (14) is approximately 109 kg (240 lb). Install bolts (15) .
Show/hide table
![]() | |
Illustration 1 | g01392702 |
- Position accumulator (11). Tighten clamps (12), and (13).
Show/hide table
![]() | |
Illustration 2 | g01392701 |
- Connect hose assemblies (9), and (10) .
Show/hide table
![]() | |
Illustration 3 | g01392691 |
Show/hide table
![]() | |
Illustration 4 | g01392689 |
- Connect hose assembly (8) .
Show/hide table
![]() | |
Illustration 5 | g01392589 |
- Connect hose assemblies (5), (6), and (7) .
Show/hide table
![]() | |
Illustration 6 | g01392583 |
- Install panel (4) .
Show/hide table
![]() | |
Illustration 7 | g01392217 |
- Install panel (3) .
Show/hide table
![]() | |
Illustration 8 | g01392216 |
- Install panel (2) .
Show/hide table
![]() | |
Illustration 9 | g01392215 |
- Install guard (1) .
Show/hide table
![]() | |
Illustration 10 | g01392214 |
Information System:
587R Pipelayer Machine Systems
Boom Winch Motor - Remove
587R Pipelayer Machine Systems
Accumulator - Remove and Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Track Drive - Install
2007/07/09
Acceptable Gap Between Lift Arm and Stop Block on Skid Steer Loaders and Multi Terrain Loaders {6119, 7050}
3412E Engine for Caterpillar Built Machines
Cat Data Link - Test
24M Motor Grader Power Train Electronic Control System
Using Messenger to Determine Diagnostic Codes
C6.6 Engines for Caterpillar Built Machines
Air Compressor - Remove and Install
C6.6 Engines for Caterpillar Built Machines
Electric Starting Motor - Remove and Install
C6.6 Engines for Caterpillar Built Machines
Electronic Control Module - Remove and Install
C6.6 Engines for Caterpillar Built Machines
ECM Mounting Bracket - Remove and Install
C6.6 Engines for Caterpillar Built Machines
Fan - Remove and Install
C6.6 Engines for Caterpillar Built Machines
Alternator Belt - Remove and Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Control Manifold and Solenoid (Parking Brake) - Remove and Install
AP655D and BG655D Asphalt Pavers Machine Systems
Hydraulic Schematic (Auxiliary Hydraulic System) - Steel Track Machine
3412E Engine for Caterpillar Built Machines
Pressure Sensor - Calibrate
C15 and C18 Generator Set Engines
Radiator Core - Remove and Install - Charge Air
AP655D and BG655D Asphalt Pavers Propel System
General Information (Propel System) - Steel Track Machine
3412E Engine for Caterpillar Built Machines
Timing - Calibrate
AP655D and BG655D Asphalt Pavers Propel System
Location of Hydraulic Components (Propel System) - Steel Track Machine
24M Motor Grader Power Train
Transmission Lubrication
AP655D and BG655D Asphalt Pavers Propel System
Piston Pump (Propel) - Steel Track Machine
C6.6 Engines for Caterpillar Built Machines
Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
2007/07/09
New Installation Sleeves for the Transmission Clutches Are Now Available {0720, 3030, 3155}
AP600D, AP655D, BG600D and BG655D Asphalt Pavers
MID 082 - CID 0967 - FMI 02