C15 and C18 Generator Set Engines Radiator Core - Remove and Install - Charge Air Caterpillar


Radiator Core - Remove and Install - Charge Air
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Start By:

  1. Remove the radiator top tank. Refer to Disassembly and Assembly, "Radiator Top Tank - Remove and Install".


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01392452

  1. Remove aftercooler cores (1).


    Illustration 2g01392455

  2. Remove seals (2).

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
P80 Rubber Lubricant 


    Illustration 3g01392455

  1. Apply Tooling (A) to seals (2). Install seals (2).


    Illustration 4g01392452

  2. Install aftercooler cores (1).

End By:

  1. Install the radiator top tank. Refer to Disassembly and Assembly, "Radiator Top Tank - Remove and Install".

Information System:

3412E Engine for Caterpillar Built Machines Pressure Sensor - Calibrate
AP655D and BG655D Asphalt Pavers Machine Systems Hydraulic Schematic (Auxiliary Hydraulic System) - Steel Track Machine
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Control Manifold and Solenoid (Parking Brake) - Remove and Install
587R Pipelayer Machine Systems Boom Winch Motor - Install
587R Pipelayer Machine Systems Boom Winch Motor - Remove
587R Pipelayer Machine Systems Accumulator - Remove and Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track Drive - Install
2007/07/09 Acceptable Gap Between Lift Arm and Stop Block on Skid Steer Loaders and Multi Terrain Loaders {6119, 7050}
3412E Engine for Caterpillar Built Machines Cat Data Link - Test
24M Motor Grader Power Train Electronic Control System Using Messenger to Determine Diagnostic Codes
C6.6 Engines for Caterpillar Built Machines Air Compressor - Remove and Install
C6.6 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
AP655D and BG655D Asphalt Pavers Propel System General Information (Propel System) - Steel Track Machine
3412E Engine for Caterpillar Built Machines Timing - Calibrate
AP655D and BG655D Asphalt Pavers Propel System Location of Hydraulic Components (Propel System) - Steel Track Machine
24M Motor Grader Power Train Transmission Lubrication
AP655D and BG655D Asphalt Pavers Propel System Piston Pump (Propel) - Steel Track Machine
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
2007/07/09 New Installation Sleeves for the Transmission Clutches Are Now Available {0720, 3030, 3155}
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 082 - CID 0967 - FMI 02
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 156 - CID 0967 - FMI 02
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 157 - CID 0967 - FMI 02
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Idler Axle - Disassemble
160M and 160 Motor Grader Machine Systems Bank Valve - Remove - Rear Frame