Radiator Bottom Tank - Remove and Install - Charge Air
`
C15 and C18 Generator Set Engines
[RENR8643]
C15 and C18 Generator Set Engines
Radiator Top Tank - Remove and Install - Charge Air
C15 and C18 Generator Set Engines
Flywheel - Install
COOLING SYSTEM
RADIATOR GP
C15 and C18 Generator Set Engines
Fan Guard - Remove and Install
C15 and C18 Generator Set Engines
Radiator Bottom Tank - Remove and Install - Jacket Water Heater
C15 and C18 Generator Set Engines
Radiator Top Tank - Remove and Install - Jacket Water Heater
C15 and C18 Generator Set Engines
Radiator Core - Remove and Install - Jacket Water Heater
C15 and C18 Generator Set Engines
Radiator Core - Remove and Install - Charge Air
C15 and C18 Generator Set Engines
Radiator Top Tank - Remove and Install - Charge Air
C15 and C18 Generator Set Engines
Radiator Bottom Tank - Remove and Install - Charge Air
1.1. Removal Procedure
2.1. Installation Procedure
Start By:
- Remove the radiator core. Refer to Disassembly and Assembly, "Radiator Core - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bracket (1).
Show/hide table
Illustration 2 g01392717 - Remove bolt (3). Loosen clamp (2). Loosen bolts (5). Remove bolt (4).
Show/hide table
Illustration 3 g01392718 - Remove seals (8). Remove bolts (6) and (7). Remove radiator bottom tank (9).
Show/hide table
![]() | |
Illustration 1 | g01392716 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | P80 Rubber Lubricant | - |
- Place radiator bottom tank (9) in position and install bolts (7) and (6).
- Apply Tooling (A) to seals (8). Install seals (8).
Show/hide table
Illustration 5 g01392717 - Install bolt (4). Tighten bolts (5). Tighten clamp (2). Install bolt (3).
Show/hide table
Illustration 6 g01392716 - Install bracket (1).
Show/hide table
![]() | |
Illustration 4 | g01392718 |
End By:
- Install the radiator core. Refer to Disassembly and Assembly, "Radiator Core - Remove and Install".
Information System:
2007/07/02
New Routing of Wiring Harness for Pressure Sensor {1408, 5057, 6543}
C15 and C18 Generator Set Engines
Radiator Top Tank - Remove and Install - Charge Air
AP655D and BG655D Asphalt Pavers Propel System
Piston Motor (Propel) - Steel Track Machine
160M and 160 Motor Grader Machine Systems
Bank Valve - Remove - Rear Frame
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Idler Axle - Disassemble
AP600D, AP655D, BG600D and BG655D Asphalt Pavers
MID 157 - CID 0967 - FMI 02
AP600D, AP655D, BG600D and BG655D Asphalt Pavers
MID 156 - CID 0967 - FMI 02
AP600D, AP655D, BG600D and BG655D Asphalt Pavers
MID 082 - CID 0967 - FMI 02
2007/07/09
New Installation Sleeves for the Transmission Clutches Are Now Available {0720, 3030, 3155}
C6.6 Engines for Caterpillar Built Machines
Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
AP655D and BG655D Asphalt Pavers Propel System
Piston Pump (Propel) - Steel Track Machine
24M Motor Grader Power Train
Transmission Lubrication
2007/08/06
Radiator and Hydraulic Oil Coolers Have Been Improved {1351}
C4.4 and C6.6 Engines for Caterpillar Built Machines
Low Power/Poor or No Response to Throttle
C4.4 and C6.6 Engines for Caterpillar Built Machines
Diagnostic Code Cross Reference
AP655D and BG655D Asphalt Pavers Propel System
Hydraulic Schematic (Propel System) - Steel Track Machine
587R Pipelayer Machine Systems
Boom Winch, Hook Winch and Winch Frame - Remove
587R Pipelayer Machine Systems
Boom Winch, Hook Winch and Winch Frame - Install
The Fitting on the Air Cleaner Group is Installed Incorrectly on Specific Off-Highway Trucks{1051}
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Disassemble
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Assemble
Reworking the Pressure Sensor for the Saw Pump{1408, 5057, 6543}
3412E Engine for Caterpillar Built Machines
Coolant Flow - Test
587R Pipelayer Machine Systems
Boom - Remove and Install